Can I flash my R-jtag chip into coolruner glitch chip?

[teknogod17]

ok here is the story I have 2 r-jtag starter kits and I installed one onto my xbox then I dropped the board while going down stairs with it and one of the qsbs bent and broke off. The 2nd r-jtag kit was for my friend who is paying me to mod his xbox. I just used the new qsbs from the second kit so now I cant use the second r-jtag chip because I have no qsb so the aftermath is that I have a extra r-jtag 1.1 chip. Can I just flash the board to a coolrunner because it is very similar to a coolrunner cr3 pro. And I know that I cant reflash it to r-jtag im just asking. If not I will buy a new coolrunner rev c.

 

[Antalpromille]

you could just do a wire install instead, it works as good as with QSBs.

 

[teknogod17]

Can you give me a diagram without the qsb and by the way these are the backside qsbs the post out and the r-jtag qsb

 

[Antalpromille]

Can you give me a diagram without the qsb and by the way these are the backside qsbs the post out and the r-jtag qsb

there are more than one QSB so you need to be more specific than that.

 

[teknogod17]

I have the starter kit wich has 2 qsbs one is the qsb post phat v2 and the other is jtag alt v2 these are the ones that bent off

 

[Antalpromille]

I have the starter kit wich has 2 qsbs one is the qsb post phat v2 and the other is jtag alt v2 these are the ones that bent off

for the jtag QSB you can just google "jtag aud_clamp wiring" and for the post QSB i would like to see how bad it is before i can tell. you could just get a new one, i think they are sold alone also (i may be wrong about this)

 

[chronic1553]

for the jtag QSB you can just google "jtag aud_clamp wiring" and for the post QSB i would like to see how bad it is before i can tell. you could just get a new one, i think they are sold alone also (i may be wrong about this)

i've never seen them sold alone, but i may also be wrong. Just do a wire instal as per this guide: http://team-xecuter.com/forums/showthread.php?t=136258

 

[Antalpromille]

i've never seen them sold alone, but i may also be wrong. Just do a wire instal as per this guide: http://team-xecuter.com/forums/showthread.php?t=136258

i was looking for that but didnt find it

 

[teknogod17]

I already removed qsb and added new ons from 2nd kit

 

[teknogod17]

its working now with new qsbs but now I have non for my cousens xbox just ribbon cable and r-jtag chip

 

[daretogo]

The linked wire install guide also mentions QSBs are available for purchase separately from resellers.

 

[teknogod17]

and this is just post out qsb fix thanks for this but now I need a way to do this without a r-jtag qsb with the switches seen here http://team-xecuter.com/forums/attachment.php?attachmentid=17583&d=1371058553

 

[chronic1553]

i was looking for that but didnt find it

lol i figured by the time i found it and hit post someone would have beat me to it.

its working now with new qsbs but now I have non for my cousens xbox just ribbon cable and r-jtag chip

do a wire install, i posted the link to the points in my last post for post_out. then search for jtag aud_clamp wiring like Antal said.

 

[chronic1553]

The linked wire install guide also mentions QSBs are available for purchase separately from resellers.

oh sh*t your right lol. i cant seem to find them on xconsoles.

 

[teknogod17]

So instead of using the r-jtag qsb just do the old school jtag

 

[Dosk3n]

Thats what the jtag qsb is, it is an old school jtag (+ rgh = r-jtag. )

So yes you can wire install.