JTAG Can I use Nand From xbox A on Xbox B??

[vinces_xbox]

I had a Falcon that fit the bill to be jtaged .
After all the jtag was done with the LTP port I can not get the controlers to connect .
I have tryed to get this fixed but nothing is working.

Well I got another Falcon that was jtagable so I ordederd the nand-x kit and was done in 3 hours.<---(NB).

My question is can I use the same nand dump from the second jtag to reflash the first one?

Pleas tell me why if this will not work.

P.S. I am going to bed I will see the replys in the morning.

Thanks all

 

[Martin C]

The issue with your first Falcon is probably nothing to do with the NAND. Depending on the wiring config, you might be interfering with the RoL board or have managed to bridge something in the process.

Take a pic of your soldered points and we'll take a look.

Personally, if it's taken you 6 hours to solder to very easy points, it's likely soldering is the issue.

 

[vinces_xbox]

Ok here r the pics I used my iphone so not the best but u can see.
I redid all the solder points and used the alt points as u can see. I read the nand with jtag tool and made freeboot to alt points but I still cant conect controlers. I have been trying to install freeboot from another jtagable board but I cant figure out what I am doing wrong. I get e79 or christmas tree 2 red and 2 green flashing and other different random lights. I can flash back to a good boot but still no controlers.

I have a pile of dead RROD boards so if I need to get a fresh NAND I should be able to get one.

 

[Lizardpcs]

What happens if you flash back the original nand? Still no controllers?

Did you originally have the jtag wires going to the ROL board? If you did that is probably where the damage is and why your controllers aren't connecting

 

[vinces_xbox]

Sorry I forgot to mention the orig.bin files and all the other files are gone. The computer crashed and everything is gone forever. I cant flash back to stock.

Also I have tryed to use a different ROL board still no love.

I am starting to think that I cant use another boxes NAND....

 

[BGAMods]

im sure you can use another xboxs nand dump if you inject the original kv into it as its called a donor nand.

 

[vinces_xbox]

im sure you can use another xboxs nand dump if you inject the original kv into it as its called a donor nand.

Do you know of a tut somewhere to do this?

 

[BGAMods]

youre best off speaking to either martin c/m azeem k/johnny2good about it.

 

[J2G]

Look here people with the same problem as you and this fixed it for them so if you have some idea of what your doing it will sort your sync problems and your pm problem to me lol

Step By Step - How To Reflash Your JTAG Console Using Xellous (Fix Controller Sync Problems!)

CREDIT TO: Brunswick /JSellY678 / Compg318