JTAG Can Not Unflag My Xbox

[TheTechnician]

Hello there, because this is made by reading the nand so i think this is the right place to ask

Im trying to unflag my Xbox from the latest silent dae.bin update, the game i was trying to play was MW3, i checked in Xval and says that im flagged because of the AP25 challenge.
I am using (until my nandx get here ) my home made LPT jtag cable and is taking 4 hours 10 min to dump the 16M of my Falcon lol, 2 days of dumping 9 nands to get 3 goods. Im using the latest Jtag Tool and using findsecdata v0.62.

I following this guide made by M AzeeM K http://team-xecuter.com/forums/showthread.php?t=59143

I made everything like it says and nothing.
My files are differents but that doesnt matter
nandpro.exe lpt: -w16 Patchedsecdata01CB.bin 1CD 1
nandpro.exe lpt: -w16 Patchedfiletable01CEBy01CC.bin 1CE 1

Im still flagged in Xval

Thx for the help

 

[aarunjon]

When you got flagged, were you connected to LIVE?

You will have been connected to LIVE in order to download the dae.bin, but when you actually got the "disc not supported" error, was your console connected to LIVE?

 

[TheTechnician]

When you got flagged, were you connected to LIVE?

You will have been connected to LIVE in order to download the dae.bin, but when you actually got the "disc not supported" error, was your console connected to LIVE?

Nop i wasnt connected to live , i was playing all day without turning off my Xbox, turned off go eat restarted and unsupported disc but no live because i always load the game and then i sign to live

 

[jayfig]

I got the same problem, Tinkered with my profile on live turned it off and came back later to play Batman AC offline and got format error. I was stumped until I looked online on TX site to see what was going on. My nandx comes in the mail tommorrow and plan on following that same tut. Ill post the result in your thread if you dont mind.

 

[frazzeld]

AP25 Flag Removal

findsecdata Alternative command

findsecdata.exe nand1.bin -osc

 

[TheTechnician]

I got the same problem, Tinkered with my profile on live turned it off and came back later to play Batman AC offline and got format error. I was stumped until I looked online on TX site to see what was going on. My nandx comes in the mail tommorrow and plan on following that same tut. Ill post the result in your thread if you dont mind.

No problem , i would like to see how it goes for you

AP25 Flag Removal

findsecdata Alternative command

findsecdata.exe nand1.bin -osc

Thx, im trying this now.




Btw this are my logs

C:\Project Unflag\Nandpro30>findsecdata.exe Nand3.bin -osc

findsecdata v0.62 2009-12-09 by boby2pc
Controller version 1
Last filetable change: 0x68
ECC change: 0x68 Filetbl: 0x01CE Secdata: 0x01CD Timestamp: 3F710CB7 2011-11-17
ECC change: 0x67 Filetbl: 0x01CC Secdata: 0x01CB Timestamp: 3F710C8A 2011-11-17
ECC change: 0x66 Filetbl: 0x01CA Secdata: 0x01C9 Timestamp: 3F710C8A 2011-11-17
ECC change: 0x65 Filetbl: 0x01C8 Secdata: 0x01C7 Timestamp: 3F71026E 2011-11-17
ECC change: 0x64 Filetbl: 0x01C6 Secdata: 0x0226 Timestamp: 33766001 2005-11-22
ECC change: 0x5A Filetbl: 0x0225 Secdata: 0x01CF Timestamp: 3F0521DB 2011-08-05

Checking secdata:

Searching for recommended

Extracting secdata:
secdata01CD.bin
secdata01CB.bin
secdata01C9.bin
secdata01C7.bin
secdata0226.bin
secdata01CF.bin

Extracting filetables:
filetable01CE.bin
filetable01CC.bin
filetable01CA.bin
filetable01C8.bin
filetable01C6.bin
filetable0225.bin

Creating patched secdata:
Patchedsecdata01CD.bin
Patchedsecdata01CB.bin
Patchedsecdata01C9.bin
Patchedsecdata01C7.bin
Patchedsecdata0226.bin
Patchedsecdata01CF.bin

Creating patched filetables:
Patchedfiletable01CEBy01CC.bin
Patchedfiletable01CEBy01CA.bin
Patchedfiletable01CEBy01C8.bin
Patchedfiletable01CEBy01C6.bin
Patchedfiletable01CEBy0225.bin

Use:
nandpro.exe lpt: -w16 Patchedsecdata01CB.bin 1CD 1
nandpro.exe lpt: -w16 Patchedfiletable01CEBy01CC.bin 1CE 1

As i can see there, that is multiple flags right ? maybe my problem is that i had an older flag then maybe update the dashboard then flag again so i CANT Ap25 Flag remove ?

 

[Martin C]

There's a sticky in this very forum about unflagging:

http://team-xecuter.com/forums/showthread.php?t=74138

You CANNOT unflag using the old methods. Take a read.

 

[TheTechnician]

There's a sticky in this very forum about unflagging:

http://team-xecuter.com/forums/showthread.php?t=74138

You CANNOT unflag using the old methods. Take a read.

Thanks a lot Martin C, i wish i did read this early , and yes i did a search and found the old method lol.

Well nothing i can do right now .
Im still waiting for the NandX to be back in stock to be able to buy it with a coolrunner so i can test your method.

 

[jayfig]

So pretty much im gonna need a coolrunner to do the RGH so I can unflag? Is there a way I can leave it connected and still get on live? Like put a toggle switch on the 3.3v red wire to disable it during live use?

 

[Martin C]

So pretty much im gonna need a coolrunner to do the RGH so I can unflag? Is there a way I can leave it connected and still get on live? Like put a toggle switch on the 3.3v red wire to disable it during live use?

You only need the Coolrunner to obtain the CPU key. Once you have it, the Coolrunner can be removed as you'll build a RETAIL image

 

[frazzeld]

No problem , i would like to see how it goes for you



Thx, im trying this now.




Btw this are my logs

C:\Project Unflag\Nandpro30>findsecdata.exe Nand3.bin -osc

findsecdata v0.62 2009-12-09 by boby2pc
Controller version 1
Last filetable change: 0x68
ECC change: 0x68 Filetbl: 0x01CE Secdata: 0x01CD Timestamp: 3F710CB7 2011-11-17
ECC change: 0x67 Filetbl: 0x01CC Secdata: 0x01CB Timestamp: 3F710C8A 2011-11-17
ECC change: 0x66 Filetbl: 0x01CA Secdata: 0x01C9 Timestamp: 3F710C8A 2011-11-17
ECC change: 0x65 Filetbl: 0x01C8 Secdata: 0x01C7 Timestamp: 3F71026E 2011-11-17
ECC change: 0x64 Filetbl: 0x01C6 Secdata: 0x0226 Timestamp: 33766001 2005-11-22
ECC change: 0x5A Filetbl: 0x0225 Secdata: 0x01CF Timestamp: 3F0521DB 2011-08-05

Checking secdata:

Searching for recommended

Extracting secdata:
secdata01CD.bin
secdata01CB.bin
secdata01C9.bin
secdata01C7.bin
secdata0226.bin
secdata01CF.bin

Extracting filetables:
filetable01CE.bin
filetable01CC.bin
filetable01CA.bin
filetable01C8.bin
filetable01C6.bin
filetable0225.bin

Creating patched secdata:
Patchedsecdata01CD.bin
Patchedsecdata01CB.bin
Patchedsecdata01C9.bin
Patchedsecdata01C7.bin
Patchedsecdata0226.bin
Patchedsecdata01CF.bin

Creating patched filetables:
Patchedfiletable01CEBy01CC.bin
Patchedfiletable01CEBy01CA.bin
Patchedfiletable01CEBy01C8.bin
Patchedfiletable01CEBy01C6.bin
Patchedfiletable01CEBy0225.bin

Use:
nandpro.exe lpt: -w16 Patchedsecdata01CB.bin 1CD 1
nandpro.exe lpt: -w16 Patchedfiletable01CEBy01CC.bin 1CE 1

As i can see there, that is multiple flags right ? maybe my problem is that i had an older flag then maybe update the dashboard then flag again so i CANT Ap25 Flag remove ?

did you run the command?

nandpro.exe lpt: -w16 Patchedsecdata01CB.bin 1CD 1
nandpro.exe lpt: -w16 Patchedfiletable01CEBy01CC.bin 1CE 1

 

[Martin C]

That MIGHT work until he goes to update. If the LDV in the previous secdata.bin is lower, he'll have problems (hence my unflag guide).

 

[TheTechnician]

did you run the command?

nandpro.exe lpt: -w16 Patchedsecdata01CB.bin 1CD 1
nandpro.exe lpt: -w16 Patchedfiletable01CEBy01CC.bin 1CE 1

Yes i did , need a nand reader and a rgh to test Martin other tutorial

 

[coolshrimp]

the best thing to do is wait till it says ur banned and Unban it with a new KV (if u got nand and cpu key) if not then simply use a coolrunner to get it.