RGH can someone

[HeLL HAZARD13]

can someone program my cool runner via team viewer prefer a mod but if i know alot about it pm me plz

 

[keil423]

Just use latest Jtag tool. Select your motherboard then click flash glitch board. Its done almost instantly. Really its the easiest part of the install and the least time consuming.

 

[HeLL HAZARD13]

Just use latest Jtag tool. Select your motherboard then click flash glitch board. Its done almost instantly. Really its the easiest part of the install and the least time consuming.

it says failed ?

 

[keil423]

What are you using to program it with? Also you do have the switch set to Program right.

 

[HeLL HAZARD13]

What are you using to program it with? Also you do have the switch set to Program right.

jtag tool by cool shrimp and yea its set to program

 

[keil423]

No I mean are you using the NandX to program it? If so when you plug it in you should have both red and green solid lights indicating that the board is not currently programed.

 

[HeLL HAZARD13]

No I mean are you using the NandX to program it? If so when you plug it in you should have both red and green solid lights indicating that the board is not currently programed.

oh yea im useing nand x and both lights are on?

 

[keil423]

Which Jtag tool version are you using?

 

[HeLL HAZARD13]

Which Jtag tool version are you using?

the regular one should u do advance tools?

 

[keil423]

If you have teamviewer PM me you ID and password. I'll pop in and check it out.

 

[keil423]

Also you might try V1.00 for the Reset glitch hack only. This version doesnt have an Advanced option.

 

[x360ccm]

it says failed ?

go into advance settings of jtag tool,click on the main tab.
select device type=usb.
then select console type=this would be whatever your console is.
then click on the reset glitch tab and press the flash glitch board button.:rolleyes2:

 

[Martin C]

Did you connect the Coolrunner cable the wrong way around at any time?