Cannot detect Flash controller

A

anti087

Full Member
Aug 31, 2011
35
0
Now i know there is a million of these threads and i have read bout near all of them.

I have soldered and resolder a million times and i cannot get this flash to detect and the xbox boots up completely fine so i know i havent screwed that is there absoultely any info can someone give please its driving me crazy




will post more in a minutes but thats without the wires.... im going to say i fd a trace :/ ugh







cleanedup
 
Last edited:
F

frazzeld

VIP Member
Jun 21, 2007
1,670
0
UK
anti087 said:
Now i know there is a million of these threads and i have read bout near all of them.

I have soldered and resolder a million times and i cannot get this flash to detect and the xbox boots up completely fine so i know i havent screwed that is there absoultely any info can someone give please its driving me crazy
Click to expand...
If you have read tham all! what is the first thing people ask?

Photos
 
C

crazybean!

VIP Member
Oct 31, 2010
151
0
bournemouth, dorset
You need to post up pics as frazzled stated.

The more you mess with your soldering, the more likely you are to cause damage to the motherboard......
I have only failed to JTAG 1 xbox, and that was because someone else had tried and destroyed a trace with poor soldering.

And just because the xbox still works doesn't mean no damage has been done, some of the points soldered for nand dump are external only and will not stop the xbox from working if they get damaged.
 
Last edited:
A

anti087

Full Member
Aug 31, 2011
35
0
Well you ALL will get a good laugh cuz it does look bad but ive done worse and still was able to get the job done right
 
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
anti087 said:
Well you ALL will get a good laugh cuz it does look bad but ive done worse and still was able to get the job done right
Click to expand...
Do you have pics?

They were laughing at my comment, to be fair :)
 
M

marshamods

VIP Member
Mar 7, 2010
1,905
0
ohio
ohhhhh boy. Clear up the flux. Acetone, MEK, or some sort of GOO Gone type product should fix that. Were are you located?
 
M

marshamods

VIP Member
Mar 7, 2010
1,905
0
ohio
Reason I am asking is because I doubt you will be able to successful install the nand x, and you need someone who knows what there doing to fix this.
 
manwithoutname

manwithoutname

1
Jun 4, 2010
3,080
0
Looking at that first picture looks like some sort of an alien infestation.
 
A

anti087

Full Member
Aug 31, 2011
35
0
lol well did you see the clean up photo?

---------- Post added at 17:23 ---------- Previous post was at 17:22 ----------

and also makes me mad cuz i did this before using an lpt cable.... so idk how i screwed this up
 
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
Remove the wires and clean up completely. Take close up images of top and bottom of these points. I reckon you'll find a damaged point along the way.
 
You must log in or register to reply here.