cannot get 5v led to light up.

mobomelter

Senior Member
Dec 6, 2004
115
0
Maryland
i've spent the last 3 hours or so going through solder point after solder point to try and find why i can't get full power to the chip. i read the trobleshooting guide and it says check pin 6. the problem is i have a 1.6 mobo and pin 6 is taken out. does anyone have any idea why i'm not getting the 5v led to light up? i've also checked my alt 5v slot and its not working either.
 

mobomelter

Senior Member
Dec 6, 2004
115
0
Maryland
ok i hooked up my dmm and i'm not getting any voltage from the 5v spot shown in the x3 install guide. another question is am i looking for dc or ac volts? the guide does not specify.
 

phillipo

Junior Member
Nov 4, 2004
18
0
USA
I have a XBOX 1.6 with X3 chip have not video I am useing a Monstor cable component hook up install went ok just no video all the other lights r ok but when i do the 256k setup by pressing the on buttion and the ejent nothing please help thanks
 

Audi90Quattro

Senior Member
Nov 30, 2004
146
0
Michigan
Philipo I thought your problem has to do with the flashbios build version. Do you get video when booting to the MS dash? I believe you have to use the standard AV pack until you flash the bios with the x3 bios or a newer flashbios version.

I believe they fixed this when going from 3.0.0 to 3.0.3.or w/e it is.

Good luck, hope this helps.
 

mobomelter

Senior Member
Dec 6, 2004
115
0
Maryland
audi is right. you have to use the standard cables until you get the bios on there. i had the same problem.
 

Darkie

Junior Member
Dec 22, 2003
16
0
question on drives

How do i know the version of my lite on drives ?

whether it is 74850c, 83850c, 83850c v2, 93450c ?

thks
 

t0il3t

Console Guru
Dec 12, 2003
823
0
Re: question on drives

gotta open up the xbox and look at the label on top of the drive, to tell if you have a 8xxx v1 or v2 you need to try to dump the key using the 8info button (I forget the exact wording on the button) if it fails then you have a v2
 

Onix1

Loyal Member
Dec 19, 2003
356
0
Re: question on drives

if your xbox 360 is older than June 09 you got a mra xbox 360. If it is pre June 09 you got 7xxx or 8xxx v1. Later 8xxx V2 or 9xxx