SAMSUNG MS25 Cannot get into vendor mode

P

page360

VIP Member
Apr 9, 2011
361
0
Portugal
Hi I have samsung Ms25 here, I do not know which firmware it as, so I tried everything in Jungle flasher guide, and still nothing, it does not go into vendor mode.

I am using x360 usb pro and the most recent jungle flasher.
I tried:
- Intro -> power cycle does not work
- Intro without power cycle does not work
- Activate.iso -> intro does not work
- Tray Half open does not work
- DeviceID Unlock / Vcc Trick (VIA/Nforce only) Stock + Modified Drives does not work
- Alternate method if you are struggling with the above does not work
- Badflash Recovery Using X360USB Pro of Samsung does not work
- Samsung Drives Using PMT or CK Probe 3 When normal bad-flash does not work


Anyone??? This never happened to me before
 
W

WestCoastConsoles

VIP Member
Dec 29, 2010
1,339
0
Portland, OR
Have you tried another sata configuration such as via or the ich7 you listed

Edit just saw that you said your going to try this I have had a few issues with drives not wanting to go into vendor mode with x360 USB pro and changing it to via worked a treat
 
C

coogrrr

Noob Account
Oct 26, 2010
6
0
Earth
www.cooogrrr.com
:facepalm:

I have scoured the web. I have done BenQ, 2 LiteON, and even this Sammy MS25 to LT1.9 and enjoyed the rewards. Now I am doing the 2.0 and latest dashboard. Being a good student that I am when learning as I always try to do I still use the JF tutorial in noob mode to ensure I catch every little thing.

The BenQ and 1 LiteON so far no issue - stock - dashboard to 13604 via USB and the LT+ 2.0 and all is good. The issue I am having now is that this Sammy which almost did the work on its own when I patched it to LT+1.9 will not enter vendor mode nor will it intro at all.

2 sata chipsets used nForce and now the Intel ICH which both read it perfectly and I get the "Verified" key icon lit up but when I try to intro it fails. status 51. I tried the activate iso with all sectors to L0. I tried the tray half ejected (matered this on the LiteON) and some random combinations best I got was status 80. :mad2:
EDIT: The sammy is LT+1.9 and still works fine to read al discs and the current dash is 12xxx currently.
Using a SATA connection and using XBOX power. Dont have USB360 cant afford one yet. I do have teamviewer (love it)
2nd Edit: JF initial info:
JungleFlasher 0.1.89 Beta (284)
Session Started Fri Nov 04 08:12:40 2011
This is a 32 bit process running on 2 x 32 bit CPUs
portio32.sys Driver Installed
portio32.sys Driver Started, thanks Schtrom !
Found 4 I/O Ports.
Found 1 Com Ports.
Found 2 windows drives C: D:
Found 1 CD/DVD drives D:
Key NOT in KeyDB
Key is: 735Dxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx ( I removed this info and replaced with x's it has the whole key ;) )
Key has been tested and verified, thanks C4eva !
Drive is Samsung..



I could use some help for certain if anyone would be willing to lend a hand this evening. I am in PST time zone and would be available after work. I will be checking all day back to this thread and checking other web hits to see what I can find and make notes on.

Sorry for waking this thread back up but it is exactly as the original poster stated for me too.

TIA
~Coog :p
 
Last edited:
You must log in or register to reply here.