Can't add dash? or select RGH2

[DoubleUp]

So earlier this week I installed my new V3 QSB's and got 4 good NAND dumps using my JRPV2 in J-Runner(287). I then wrote TRINITY_DGX.ecc to the NAND. I have not been able to get my DGX v1.1s to boot to Xell. This is all of course before the big news. I now wish to just install my CR3 Pro and use the new files to get my cpu key. Do I have to "remove" the TRINITY_DGX.ecc before installing the CR3 Pro? But per this posts title I cannot add dashes. When I chose RGH2, Glitch, add dash, and choose 16203 it does not show 16203 and resets to RGH, and unbubbles glitch. Then will not let me choose RGH2 or glitch. So any advice would be greatly apprieciated! Here is my original J-Runner log:
===================================================
Wednesday, February 27, 2013 3:42:21 PM
J-Runner v0.2 Beta (287) Started

Filechecks disabled - No Filechecks carried out
===================================================
Friday, March 01, 2013 9:59:45 PM
J-Runner v0.2 Beta (287) Started

Filechecks disabled - No Filechecks carried out
Version: 10
Flash Config: 0x00023010
CB Version: 9231
Trinity
Reading Nand to C:\Users\DoubleUp\Desktop\J-Runner v02 Beta (287) Core Pack\output\nanddump1.bin
Reading Nand
Done!
in 3:28 min:sec
Reading Nand to C:\Users\DoubleUp\Desktop\J-Runner v02 Beta (287) Core Pack\output\nanddump2.bin
Initializing nanddump1.bin..
Nand Initialization Finished
Reading Nand
Done!
in 3:29 min:sec
Reading Nand to C:\Users\DoubleUp\Desktop\J-Runner v02 Beta (287) Core Pack\output\nanddump3.bin
Comparing...
Nands are the same
Reading Nand
Done!
in 3:28 min:sec
Reading Nand to C:\Users\DoubleUp\Desktop\J-Runner v02 Beta (287) Core Pack\output\nanddump4.bin
Comparing...
Nands are the same
Reading Nand
Done!
in 3:28 min:sec
Comparing...
Nands are the same
Version: 10
Flash Config: 0x00023010
Writing Nand
TRINITY_DGX.ecc
Done!
in 0:18 min:sec
Could not find a part of the path.
===================================================
Saturday, March 02, 2013 8:28:58 PM
J-Runner v0.2 Beta (287) Started

WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button

Filechecks disabled - No Filechecks carried out
===================================================
Saturday, March 02, 2013 8:34:02 PM
J-Runner v0.2 Beta (287) Started

WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button

Filechecks disabled - No Filechecks carried out

 

[jsinger47]

You need to enable filechecks/downloads. It is in the settings menu.

 

[DoubleUp]

You need to enable filechecks/downloads. It is in the settings menu.

Thanks jsinger !!!!

 

[DoubleUp]

But can anyone tell me whether or not I have to do anything about the TRINITY_DGX.ecc file I wrote to the NAND if I want to just use the new ecc files and my CR3 Pro to obtain my cpu key and complete my RGH?

 

[keith6625]

You should be able to write the new ecc files to the nand for the cr3pro but correct me if I am wrong but I thinkthe ecc file for the cr3pro and the rgx are the same its the timing files are different but you flash them to the cr3pro not the nand


Edit:
Sorry I mis read use the new ecc files that just came out about a week ago