Cant Boot Any Autoinstaller

[thevoices]

I have a 1.4 box with a 2.6 chip. Flashed with both 4983.67 and 5035 (old) and neither will boot an autoinstaller disk Slayer 2.5,2.6 or Autoinstaller Deluxe 2.11. Tried 2 different cds and 2 different hard drives, cd starts to read just after the xecuter2 logo then xbox resets. Tried burning to cdr/cdrw/dvdr/dvdrw. What is funny is an old slayer 1.2 installer (without stealth in the autoinstall, which I am trying to get, will boot and install fine even on a cdr. For y info do I have to be on a certain bank or does flash enable have to be off. Have tried both ways. Thanks for the help

 

[DJBOOBY]

you are making them into a iso if not allready are you burning it the right way

 

[thevoices]

Yes I am using already built iso disks and they boot on another box. I am thinking I might have a bad mainboard. I am moving the mod to another machine and will let you know

 

[thevoices]

Got it. Bad Motherboard. Came back from a friend and I should have know. Thought the old xecuter 2.3 gave it up but nope it worked in another machine. I went straight to a newer 2.6 chip I had and it never worked. Should have tried to boot a game disk. Thanks djbooby for replying

 

[DJBOOBY]

can,t be motherboard you say an old slayer installer worked i had trouble with my slayer and it turn out to be a bios prolbem had x3 but had to flash x2 5035 bios to get it to run so if old slayer works it counld be harddrive / dvd drive / bios but most likey media try cd-rw or dvd-r

checkout this post
http://teamxecuter.com/forums/showthread.php?t=39643&page=2&pp=10