Can't Boot my falcon into xell

[Black)Ninja]

hi

i used the alternate jtag wiring for my falcon seen in this
tutorial:
http://www.team-xecuter.com/forums/showthread.php?t=55189

and i used the jtag tool with the alternate configuration to load xell on my nand.

now i want to plug in on my tv and start it, but the screen is black.

I tried booting via eject button, but nothing changes.
there doesn't seem to be a rrod either because the 4 green lights are just like when i boot a normal xbox.

So can someone help me?

 

[manwithoutname]

1. Are you using HDMI cable or normal A/C connection? You can only boot and view xell via A/C connection.

2. Are there any bad blocks in your original NAND dump and specifically in the first 50 blocks?

3. Which version of Jtag Tool did you use and from any particular tutorial?

 

[Black)Ninja]

1. HDMI....
now it works, thanks a lot!
2. no, i used xnandhealer and dumped several times
3. i use the newest version 2.5, shall i continue with it
or change back to 2.2?

 

[manwithoutname]

You needed not answer 2,3 & 4 as clearly 1 was the cause .

Try v2.50, if it doesn't work for you then try this instead. Let us know which one works for you and how it goes.

 

[Black)Ninja]

now i have new problem, i get te e79 error whenever i try to boot with freeboot!

what's the issue?

i put freeboot via jtag tool 2.5(and alternate files) on my box with the option
"Aud_clamp SMC"

 

[manwithoutname]

If you replaced the smc files with mine, do not tick audio_clamp box. Just use the default settings.

 

[roden]

Ya this works trust me i did the same thing, just use the given files.

 

[Black)Ninja]

Indeed, it works now!!
thx again,

now i start with the jtag follow ups.
Do i still need the lpt connector wired to my mainboard?

 

[manwithoutname]

No, you can remove the LPT connection now.