HITACHI 79 Can't flash Hitachi 79 help

[loman123]

hi, everyone. I need some help how to flash Hitachi 79. I have problem get DVD key. I follow the Hitachi tutorial how to flash Hitachi 79 and get no luck. I have read over and over many time the tutorial how to flash and try to do with no luck.
I always double check before I proceed to the next step. I got stuck on Hitachi GDR3120 Tab. in the Jungle Flasher. When Click the Send Mode-B button in the Jungle flasher, the Send Mode-B command screen pop-up and I press ejected button from Ck3 Lite and inset 79 unlock CD that I burn early and turn switch to off on Ck3 lite board. Then I click OK on pop-up screen and let it go about 5 second and turn the switch to ON from Ck3 lite board to close the CD tray. As soon as the tray close to read the CD, I get the message like this"No Hitachi drives were found!" I don't know what I did wrong. Can someone help how to get it going please. Thanks in advance.
Here is my JF:
ungleFlasher 0.1.92 Beta (304)

Session Started Wed Mar 27 00:20:29 2013



This is a 32 bit process running on a 32 bit CPU

X360USB PRO detected, Version 0.18



portio32.sys Driver Installed

portio32.sys Driver Started, thanks Schtrom !

Found 5 I/O Ports.

Found 2 Com Ports.

Found 4 windows drives A: C: D: H:

Found 1 CD/DVD drives H:



...........................

Drive, answers normal Windows Inquiry 12 0 0 0 24 0

0000: 05 80 00 32 5B 00 00 00 - 48 4C 2D 44 54 2D 53 54 ...2[...HL-DT-ST

0010: 44 56 44 2D 52 4F 4D 20 - 47 44 52 33 31 32 30 4C DVD-ROM GDR3120L

0020: 30 30 37 39 0079



Mode-B Done!

Found drive A: - Removable.

Found drive C: - Hard Drive.

Found drive D: - Hard Drive.

Found drive H: - CD/DVD.

No Hitachi drives were found!

 

[loman123]

Ok, I got it going by change another computer. However, I still have some problem with flashing LT 3.0. I have no problem to restock firmware for Dash update but I still have problem to do step #10 on tutorial. When I select LT-Plus and then I click the button LT-Plus to tests Flash Stability by writing to sector 9003F000, I get the auto load LT Plus message"can't open file C\JungleFlasher v.0.1.92.Beta (304) Firmware\LT Plus 79-4e10-2.0.bin." Did anyone know to fix this problem? I bought this unit from my friend that already flasher LT 2.0 firmware. I put back to original stock and I update Dashboard to 14699 and now I want to flash with the latest LT3.0. Please help

hi, everyone. I need some help how to flash Hitachi 79. I have problem get DVD key. I follow the Hitachi tutorial how to flash Hitachi 79 and get no luck. I have read over and over many time the tutorial how to flash and try to do with no luck.
I always double check before I proceed to the next step. I got stuck on Hitachi GDR3120 Tab. in the Jungle Flasher. When Click the Send Mode-B button in the Jungle flasher, the Send Mode-B command screen pop-up and I press ejected button from Ck3 Lite and inset 79 unlock CD that I burn early and turn switch to off on Ck3 lite board. Then I click OK on pop-up screen and let it go about 5 second and turn the switch to ON from Ck3 lite board to close the CD tray. As soon as the tray close to read the CD, I get the message like this"No Hitachi drives were found!" I don't know what I did wrong. Can someone help how to get it going please. Thanks in advance.
Here is my JF:
ungleFlasher 0.1.92 Beta (304)

Session Started Wed Mar 27 00:20:29 2013



This is a 32 bit process running on a 32 bit CPU

X360USB PRO detected, Version 0.18



portio32.sys Driver Installed

portio32.sys Driver Started, thanks Schtrom !

Found 5 I/O Ports.

Found 2 Com Ports.

Found 4 windows drives A: C: D: H:

Found 1 CD/DVD drives H:



...........................

Drive, answers normal Windows Inquiry 12 0 0 0 24 0

0000: 05 80 00 32 5B 00 00 00 - 48 4C 2D 44 54 2D 53 54 ...2[...HL-DT-ST

0010: 44 56 44 2D 52 4F 4D 20 - 47 44 52 33 31 32 30 4C DVD-ROM GDR3120L

0020: 30 30 37 39 0079



Mode-B Done!

Found drive A: - Removable.

Found drive C: - Hard Drive.

Found drive D: - Hard Drive.

Found drive H: - CD/DVD.

No Hitachi drives were found!

 

[BL4K3Y]

Extract each of the firmware files from the latest firmware pack to the JungleFlasher>Firmware directory.

JungleFlasher will load the correct firmware and write to the relevant sectors on your drive.

Make sure you are using the latest version of JungleFlasher too.

 

[Antalpromille]

i dont wanna offend you but if JF is looking for "LT Plus 79-4e10-2.0.bin" in "C:\JungleFlasher v.0.1.92.Beta (304) Firmware\", what do you think could solve the problem? put the file where JF wants it maybe?

 

[Spaz2203]

Give it alittle bit, mine initially says that but if I let it sit it comes up.. you may have to refresh it, cant remember if I do or not.

Sent from my GT-P5113 using Tapatalk 2

 

[loman123]

i dont wanna offend you but if JF is looking for "LT Plus 79-4e10-2.0.bin" in "C:\JungleFlasher v.0.1.92.Beta (304) Firmware\", what do you think could solve the problem? put the file where JF wants it maybe?

I don't know the answer. I have all LT 3.0 bin put inside the jungle flasher firmware. I don't know why the jungle flasher can't find the lt 3.0 bin

- - - Updated - - -

i dont wanna offend you but if JF is looking for "LT Plus 79-4e10-2.0.bin" in "C:\JungleFlasher v.0.1.92.Beta (304) Firmware\", what do you think could solve the problem? put the file where JF wants it maybe?

I don't know the answer. I have all LT 3.0 bin put inside the jungle flasher firmware. I don't know why the jungle flasher can't find the lt 3.0 bin

 

[Antalpromille]

I don't know the answer. I have all LT 3.0 bin put inside the jungle flasher firmware. I don't know why the jungle flasher can't find the lt 3.0 bin

it asks for lt2.0 and you said yourself "I have all LT 3.0 bin put inside the jungle flasher firmware". get the latest JF and put the firmwares where they are supposed to be without renaming anything.

 

[loman123]

it asks for lt2.0 and you said yourself "I have all LT 3.0 bin put inside the jungle flasher firmware". get the latest JF and put the firmwares where they are supposed to be without renaming anything.

Thanks. I have to put lt2.0 bin and lt 3.0 bin together in firmware folder and try again.

 

[Antalpromille]

Thanks. I have to put lt2.0 bin and lt 3.0 bin together in firmware folder and try again.

upgrade JF from 1.92 to 1.94 also or it will flash LT2.0 insted of LT3.0.

 

[loman123]

Thanks guy. I got it work now but the Hitachi DVD drive reading is not good. My old Benq DVD drive reading very good but it has problem with red ring of death.