Hi all i posted in the noob section because this is my first slim flash. Heres my problem. i ordered a replacement pcb board (team x) i dumped the key of my stock board. i installed my new board and ran jungle flasher (im using x360 pro v.2) i ran jf everything was going just like the tutorial said it would until i got to mtk flash. i went to put it in intro\device i power cycled and where jf says i should see (0x00) that was previously blank. it still is blank. it never came on. so continued the flash like i would a phat but the flash didn't take. I tried it again a few more times and always the same thing. i know im missing something i just don't know what it is.
LITEON DG-16D4S - SLIM cant get (0X00) to come up
- Thread starter srog545
- Start date
BL4K3Y
VIP Member
Did you set the switch to the WP#1 position as per the guide?
The SPI status button will show 0x8C (SPI locked) - you need to set the switch to WP#1 and click that button, the status should then change to say 0x00.
Note that if the PCB is blank, you should use Lite-On Erase to get it into Vendor mode (status 0x72).
The SPI status button will show 0x8C (SPI locked) - you need to set the switch to WP#1 and click that button, the status should then change to say 0x00.
Note that if the PCB is blank, you should use Lite-On Erase to get it into Vendor mode (status 0x72).
Last edited:
here's my jf log i hope this helps
JungleFlasher 0.1.82 Beta (234)
Session Started Wed Nov 28 06:19:05 2012
This is a 32 bit process running on a 32 bit CPU
X360USB PRO detected, Version 0.18
portio32.sys Driver Installed
portio32.sys Driver Started, thanks Schtrom !
Found 11 I/O Ports.
Found 5 Com Ports.
Found 2 windows drives C: D:
Found 0 CD/DVD drives
PortIO unloaded.
Drive is Slim Lite-On..
Key found in KeyDB at record (3 - Desktop)
Key is: 773FA5EF43C62B30368B9B2C32085E94
Key has been tested and verified, thanks C4eva !
Drive is Slim Lite-On..
Sending Vendor Intro to port 0x0000
Status 0x51
Re-sending Vendor Intro:
.......
Serial flash found with Status 0x72
Sending Device ID request to port 0x0000
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes
Key: 773FA5EF43C62B30368B9B2C32085E94 is verified, Thanks C4eva
............
Grabbing Key sector: ................
Key Sector verified.
Grabbing Serial info: ........
Drive is Slim Lite-On..
Dummy.bin file saved to Dummy.bin
Loading firmware from buffer
Inquiry string found
Identify string found
Drive key @ 0xA030 773FA5EF43C62B30368B9B2C32085E94
Firmware Osig: [PLDS DG-16D4S 0225]
Firmware is: SlimKey Extract
Key database updated
Loading firmware file C:\Documents and Settings\Owner\Desktop\JungleFlasher v0.1.92 Beta (304)\Lite Touch 3.0\Firmware\LTPlus-0225-v2.0.bin
MD5 hash: 1012021472620cad9adf1f838497668e
Drive key @ n/a D53B9CA4511C9BCFA5C31123166A5829
Firmware Osig: [PLDS DG-16D4S 0225]
Firmware is: Stock
Spoofing Target
DVD Key copied to target
Key Sector copied from Source to Target
Inquiry string copied to Target
Identify string copied to Target
Serial data copied from Source to Target
Spoofing Target
DVD Key already matches
Key Sector copied from Source to Target
ID strings already match
Serial data already matches
Target f/w saved as: cfw.bin
Sending Vendor Intro to port 0x0000
Status 0x51
Re-sending Vendor Intro:
......
Serial flash found with Status 0x72
Sending Device ID request to port 0x0000
Spi Status: 0x0
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes
Getting Status from port 0x0000
SPi flash found with Status 0x72
Sending Chip Erase to Port 0x0000
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................
............
Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Dumped in 11953mS
Write verified OK !
Restoring sector 0x3E000.
Sending Sector Erase to Port 0x0000
Erasing: 0x3E000
Writing: 0x3E000
Authorised !
............................
Restore verified OK !
Drive is Slim Lite-On..
Key found in KeyDB at record (3 - demo2)
Key is: 773FA5EF43C62B30368B9B2C32085E94
Key has been tested and verified, thanks C4eva !
Sending Vendor Outro to port 0x0000
Drive is Slim Lite-On..
Key found in KeyDB at record (3 - demo2)
Key is: 773FA5EF43C62B30368B9B2C32085E94
Key has been tested and verified, thanks C4eva !
JungleFlasher 0.1.82 Beta (234)
Session Started Wed Nov 28 06:19:05 2012
This is a 32 bit process running on a 32 bit CPU
X360USB PRO detected, Version 0.18
portio32.sys Driver Installed
portio32.sys Driver Started, thanks Schtrom !
Found 11 I/O Ports.
Found 5 Com Ports.
Found 2 windows drives C: D:
Found 0 CD/DVD drives
PortIO unloaded.
Drive is Slim Lite-On..
Key found in KeyDB at record (3 - Desktop)
Key is: 773FA5EF43C62B30368B9B2C32085E94
Key has been tested and verified, thanks C4eva !
Drive is Slim Lite-On..
Sending Vendor Intro to port 0x0000
Status 0x51
Re-sending Vendor Intro:
.......
Serial flash found with Status 0x72
Sending Device ID request to port 0x0000
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes
Key: 773FA5EF43C62B30368B9B2C32085E94 is verified, Thanks C4eva
............
Grabbing Key sector: ................
Key Sector verified.
Grabbing Serial info: ........
Drive is Slim Lite-On..
Dummy.bin file saved to Dummy.bin
Loading firmware from buffer
Inquiry string found
Identify string found
Drive key @ 0xA030 773FA5EF43C62B30368B9B2C32085E94
Firmware Osig: [PLDS DG-16D4S 0225]
Firmware is: SlimKey Extract
Key database updated
Loading firmware file C:\Documents and Settings\Owner\Desktop\JungleFlasher v0.1.92 Beta (304)\Lite Touch 3.0\Firmware\LTPlus-0225-v2.0.bin
MD5 hash: 1012021472620cad9adf1f838497668e
Drive key @ n/a D53B9CA4511C9BCFA5C31123166A5829
Firmware Osig: [PLDS DG-16D4S 0225]
Firmware is: Stock
Spoofing Target
DVD Key copied to target
Key Sector copied from Source to Target
Inquiry string copied to Target
Identify string copied to Target
Serial data copied from Source to Target
Spoofing Target
DVD Key already matches
Key Sector copied from Source to Target
ID strings already match
Serial data already matches
Target f/w saved as: cfw.bin
Sending Vendor Intro to port 0x0000
Status 0x51
Re-sending Vendor Intro:
......
Serial flash found with Status 0x72
Sending Device ID request to port 0x0000
Spi Status: 0x0
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes
Getting Status from port 0x0000
SPi flash found with Status 0x72
Sending Chip Erase to Port 0x0000
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................
............
Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Dumped in 11953mS
Write verified OK !
Restoring sector 0x3E000.
Sending Sector Erase to Port 0x0000
Erasing: 0x3E000
Writing: 0x3E000
Authorised !
............................
Restore verified OK !
Drive is Slim Lite-On..
Key found in KeyDB at record (3 - demo2)
Key is: 773FA5EF43C62B30368B9B2C32085E94
Key has been tested and verified, thanks C4eva !
Sending Vendor Outro to port 0x0000
Drive is Slim Lite-On..
Key found in KeyDB at record (3 - demo2)
Key is: 773FA5EF43C62B30368B9B2C32085E94
Key has been tested and verified, thanks C4eva !
BL4K3Y
VIP Member
Try pressing CTRL + SHIFT + F11 together in JungleFlasher to "force" an SPI lock.
Once you see the 0x8C text on the SPI status button, set the switch on the PCB back to WP#0.
Once you see the 0x8C text on the SPI status button, set the switch on the PCB back to WP#0.
Last edited:
@BL4K3Y. i dont think i did switch wp#1.I think that may be the step that i missed. Thanks for your help i give it a try and keep you updated to see if that was it.
---------- Post added at 03:19 ---------- Previous post was at 03:18 ----------
Ill also try Ctrl shift F11 thanks
---------- Post added at 03:19 ---------- Previous post was at 03:18 ----------
Ill also try Ctrl shift F11 thanks