RGH Can't get anything working...please help me

J

Jubei-1

Junior Member
Nov 30, 2011
11
0
Update: Can't get anything working...please help me

Hi everyone,
I'm hoping you can help me out.

So Here's my Problem.
- Got a BB Jasper (256)
- installed all the RGH Stuff (Coolrunner TX)
- installed with QSBs
- connected Nand-X to QSBs

can't dump my Nand. There is either a Problem with the Driver saying:
can't find USB-Device...

or if I get this to work (reinstall drivers, reset, recycle)

then nandpro keeps giving me a lot of Errors when reading the nand.

So as you can see everything seems to be screwd up.


Still to mention:
- rechecked soldering...sems to be fine trying to upload pics...http://s154.photobucket.com/albums/s250/Jubei-Ashura/Xbox/
- nand-x is on ver. 2.0d (still waiting for ck3i to update the nand-x)
- using nandpro 2.0 for dump
 
Last edited:
J

Jubei-1

Junior Member
Nov 30, 2011
11
0
so grounding doesn't help

now a new Problem showed up. My PSU is turning red.
First everything was fine. Coolrunner steady lights now just a little flash then PSU red CR dead.

It's horrible everytime I try to solve one thing the next one is coming up. Gonna throw the whole thing out the window...
 
J

Jubei-1

Junior Member
Nov 30, 2011
11
0
Red PSU-Prob solved...
The only point (I think) that was messy is STBY_CLCK
so i resoldered to the alternate Point.

However still the old Problems presist.

I start to hate it....

Thx for all your help so far. I'm giving up...
for today :(
 
A

abyss

VIP Member
Dec 16, 2010
187
0
Belgium
well if you only get reading errors now it is definatly your soldering or you broke something
check the board or post pictures of your install :D
 
A

abyss

VIP Member
Dec 16, 2010
187
0
Belgium
oh sorry looked over it. seems to be ok
no splashes anywhere?
doesn't the nand-x need to be v3?
 
A

abyss

VIP Member
Dec 16, 2010
187
0
Belgium
oh ok learned something :D
try another pc perhaps?
or try nandpro v3.0a?
 
Last edited:
S

srt4fun

Senior Member
Sep 8, 2011
133
0
California
The J2D1 QSB looks like it could use some touch-up, especially pin 6. Also, point B looks iffy, the QSB might be bridging the pads for C3B1 and C3B2. I'd double check with a multimeter to be sure.
 
J

Jubei-1

Junior Member
Nov 30, 2011
11
0
Resoldered Point B to Alternate one.

There are no Bridges but I'm gonne resolder tomorrow just to be sure.
 
R

razblade77

VIP Member
Sep 4, 2011
165
0
bedfordshire
Ubergeek said:
My 12 year old fitted a slim qsb today for sh*ts and giggles. Worked first time.

That's how easy they are lol
Click to expand...

lol exactly u realy cant go worng with a qsb, its that easy but taking them off is a pain in the ass tho.

jubei try reinstaling ur drivers or try a difffrent pc and make sure u ground ur 360 to the pc case if u can.
 
J

Jubei-1

Junior Member
Nov 30, 2011
11
0
UPDATE: Can't get anything working...please help me

So...after a lot of soldering here's where I am at the moment:

- Unsoldered QSB
- Cleand the Board
- Installed Pin-Headers:



Then I wanted to make sure Box is still workable so I put it all back together

But..guess what it's not starting up. So I think this one is fried.

Going to get myself a new one now.
 
You must log in or register to reply here.