LITEON DG-16D4S - SLIM Can't get firmware for ****.

mo5081 · Jun 24, 2012

Can't get firmware.

Dashboard version: 2.0.13604.0
Xbox360 slim drive: DG-16D4S
FW: 0225 (with lt+2.0, working)
replacement PCB

Software Tool: Jungle flashet 0.1.92 Beta
Hardware Tool: X360USBpro2

preparations: Drivers installed (Port Proporties="detected", Com Port Proporties="detected",Drive proporties="detected".
Alle cables are connected correctly.

followed Step by step as written on "jftut1.4.4.pdf"
and online "http://team-xecuter.com/forums/showthread.php?t=67582"

when after selecting "yes" and "power cycle" I get:
- Sending Vendor Intro to port 0x0000
- status 0x51
-
- SlimKey extraction failed!

tried with Ctrl+Shift+F10 before, tried on a x64 system, reinstalled win7, All the same results.

I've searched a more information on google and and at this forums. None of the answers corresponding with my problem.

please help, thanks in advance,

Ubergeek · Jun 24, 2012

You could try following the actual instructions ?

That's a good start

rawdeal · Jun 24, 2012

try dvdkey 32 in jungleflasher click slimkey to read key for 0225

sarah1331 · Jun 24, 2012

Click slim key
Then no to send unlock to slim then yes to power off/on

mo5081 · Jun 24, 2012

rawdeal said:
try dvdkey 32 in jungleflasher click phatkey to read key for 0225

Phatkey failed!

Drive in vendor mode! dvd files extraction aborted!

jsinger47 · Jun 24, 2012

rawdeal said:
try dvdkey 32 in jungleflasher click phatkey to read key for 0225

Did you just tell him to phatkey a slim drive? Haha.

Follow the Jf Tut and everything will work just fine.

In the case of a spelling error, I blame Tapatalk.

mo5081 · Jun 24, 2012

sarah1331 said:
Click slim key
Then no to send unlock to slim then yes to power off/on

I did it several times. (with very fast power cycle within 1 second)

all same result!

rawdeal · Jun 24, 2012

sorry i meant slimkey my bad im tired lol

mo5081 · Jun 24, 2012

Follow the Jf Tut and everything will work just fine.[/QUOTE said:
I've read the Tut several times before executing the procedures.

In the Tut the DVDkey was found and verified.
In my situation it was NOT found and NOT verified.

jsinger47 · Jun 24, 2012

I've read the Tut several times before executing the procedures.<br />
<br />
In the Tut the DVDkey was found and verified.<br />
In my situation it was NOT found and NOT verified.

Click to expand...

........because you haven't extracted it yet.

You are proving you don't understand the core concepts here.

In the case of a spelling error, I blame Tapatalk.

Ubergeek · Jun 24, 2012

How is it that guys who can't do it always say they have followed the tutorial correctly when it's obvious they haven't lol

mo5081 · Jun 24, 2012

Ubergeek said:
How is it that guys who can't do it always say they have followed the tutorial correctly when it's obvious they haven't lol

Thanks for your txt... but it is NOT helping me..

---------- Post added at 00:58 ---------- Previous post was at 00:49 ----------

log of jungleflasher 0.1.92:

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.92 Beta (304)
Session Started Mon Jun 25 00:45:32 2012

This is a 32 bit process running on a 32 bit CPU
X360USB PRO detected, Version 0.18

Found 1 I/O Ports.
Found 2 Com Ports.
Found 11 windows drives C: D: E: F: G: H: I: J: K: L: M:
Found 2 CD/DVD drives G: H: M:

Drive is Slim Lite-On..

0000: 05 80 00 32 5B 00 00 00 - 50 4C 44 53 20 20 20 20 ...2[...PLDS
0010: 44 47 2D 31 36 44 34 53 - 20 20 20 20 20 20 20 20 DG-16D4S
0020: 30 32 32 35 00 00 00 00 - 00 00 00 00 00 00 00 00 0225............
0030: 00 00 00 00 41 30 41 30 - 00 00 00 00 00 00 00 00 ....A0A0........
0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0060: 44 37 31 34 43 47 31 30 - 31 38 30 33 30 30 46 59 *****************
0070: 4B 20 20 20 K

Sending Vendor Intro to port 0x0000
Status 0x51
Re-sending Vendor Intro:
.......................................
Device Intro failed!

SlimKey extraction failed!

Drive is Slim Lite-On..

0000: 05 80 00 32 5B 00 00 00 - 50 4C 44 53 20 20 20 20 ...2[...PLDS
0010: 44 47 2D 31 36 44 34 53 - 20 20 20 20 20 20 20 20 DG-16D4S
0020: 30 32 32 35 00 00 00 00 - 00 00 00 00 00 00 00 00 0225............
0030: 00 00 00 00 41 30 41 30 - 00 00 00 00 00 00 00 00 ....A0A0........
0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0060: 44 37 31 34 43 47 31 30 - 31 38 30 33 30 30 46 59 ************
0070: 4B 20 20 20 K

Sending Vendor Intro to port 0x0000
Status 0x51
Re-sending Vendor Intro:
.......................................
Device Intro failed!

SlimKey extraction failed!

I tried to use an older version of Jungleflasher:

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.91 Beta (300)
Session Started Mon Jun 25 00:35:03 2012

This is a 32 bit process running on a 32 bit CPU
X360USB PRO detected, Version 0.18

Found 1 I/O Ports.
Found 2 Com Ports.
Found 11 windows drives C: D: E: F: G: H: I: J: K: L: M:
Found 2 CD/DVD drives G: H: M:

Drive is Slim Lite-On..

0000: 05 80 00 32 5B 00 00 00 - 50 4C 44 53 20 20 20 20 ...2[...PLDS
0010: 44 47 2D 31 36 44 34 53 - 20 20 20 20 20 20 20 20 DG-16D4S
0020: 30 32 32 35 00 00 00 00 - 00 00 00 00 00 00 00 00 0225............
0030: 00 00 00 00 41 30 41 30 - 00 00 00 00 00 00 00 00 ....A0A0........
0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0060: 44 37 31 34 43 47 31 30 - 31 38 30 33 30 30 46 59 *************
0070: 4B 20 20 20 K

Sending Vendor Intro to port 0x0000
Status 0x51
Re-sending Vendor Intro:
....................................
Device Intro failed!

SlimKey extraction failed!

Drive is Slim Lite-On..

0000: 05 80 00 32 5B 00 00 00 - 50 4C 44 53 20 20 20 20 ...2[...PLDS
0010: 44 47 2D 31 36 44 34 53 - 20 20 20 20 20 20 20 20 DG-16D4S
0020: 30 32 32 35 00 00 00 00 - 00 00 00 00 00 00 00 00 0225............
0030: 00 00 00 00 41 30 41 30 - 00 00 00 00 00 00 00 00 ....A0A0........
0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0060: 44 37 31 34 43 47 31 30 - 31 38 30 33 30 30 46 59 **************
0070: 4B 20 20 20 K

Sending Vendor Intro to port 0x0000
Status 0x51
Re-sending Vendor Intro:
..............................
Device Intro failed!

SlimKey extraction failed!

please help? Anyone??

mo5081 · Jun 26, 2012

@ Ubergeek;

Last two days I've looked for some answers on this Forum which is related with my problem. As I can see YOU are one of the most experienced people. I'm just trying to read out my drive info for the first time.

You wrote"How is it that guys who can't do it always say they have followed the tutorial correctly when it's obvious they haven't lol"
Maybe you know which part of the tut I've missed or I did the wrong steps?

Many THANKS in advance!!

jsinger47 · Jun 26, 2012

how are you power cycling the drive?

doe1200 · Jun 26, 2012

is it a tx replacement you are using,if so just intro power cycle,move switch to wp1,press the spi radio button in jungleflasher to to change status from 0x8c locked to 0x00 unlocked,then just hit read in jungleflasher

mo5081 · Jun 26, 2012

@joesinger47 Thank you for your reply,

I have a x360usb pro V2.
On top of it there is power-switch available.
This is what I use for power cycle.

jsinger47 · Jun 26, 2012

doe1200 said:
is it a tx replacement you are using,if so just intro power cycle,move switch to wp1,press the spi radio button in jungleflasher to to change status from 0x8c locked to 0x00 unlocked,then just hit read in jungleflasher

this is 100% correct!

i missed this in your original post

you cannot slimkey replacement pcbs

mo5081 · Jun 26, 2012

doe1200 said:
is it a tx replacement you are using,if so just intro power cycle,move switch to wp1,press the spi radio button in jungleflasher to to change status from 0x8c locked to 0x00 unlocked,then just hit read in jungleflasher

Thank you for your reply,

Please explain step by step
(yes, I have a replacement PCB installed)

jsinger47 · Jun 26, 2012

mo5081 said:
Thank you for your reply,

Please explain step by step
(yes, I have a replacement PCB installed)

the step by step to read a replacement pcb is in the JungleFlasher Tutorial, as well as the many tutorials in the stickies in the modding section.

This is what Ubergeek was talking about.

That being said, there is no way to get a dummy.bin from a replacement pcb.

If you want a dummy.bin for your drive, you will need to write the fw to an original pcb, then slimkey that.

mo5081 · Jun 26, 2012

joesinger47 said:
the step by step to read a replacement pcb is in the JungleFlasher Tutorial, as well as the many tutorials in the stickies in the modding section.

This is what Ubergeek was talking about.

That being said, there is no way to get a dummy.bin from a replacement pcb.

If you want a dummy.bin for your drive, you will need to write the fw to an original pcb, then slimkey that.

Many thanks joesinger47, this is what I indeed not read about it last 7 days, before I was seeking for help on this forum.:facepalm:

As I don't have a originel pcb I'm in deep ****.
And As I'm don't have the original fw I'm stuck with present fw on my drive.

Therefor THANK YOU, ALL WHO HELPED ME and others on this forum!

Search

Search

LITEON DG-16D4S - SLIM Can't get firmware for ****.

mo5081

Junior Member

Ubergeek

Xecuter Groupie

rawdeal

Senior Member

sarah1331

BANNED

mo5081

Junior Member

jsinger47

mo5081

Junior Member

rawdeal

Senior Member

mo5081

Junior Member

jsinger47

Ubergeek

Xecuter Groupie

mo5081

Junior Member

mo5081

Junior Member

jsinger47

doe1200

mo5081

Junior Member

jsinger47

mo5081

Junior Member

jsinger47

mo5081

Junior Member