LITEON DG-16D4S - SLIM Can't get key...identify command returned an error

Partykangeroo

Noob Account
May 3, 2015
5
0
Please help,
i have a new pcb for the 16d4s slim model...i need to extract the key but it is not working for me.
i use the ck3i and x360 usb pro...(updated to ver.0.20).
i get an error reading.."identify command returned error".... Then the next pop up is the normal one..wish to unlock slim...no...then yes ..power off and on again ....slimkey failed..
i tried it over and over again...
does my problem has anything to do with the command returned error message?..
hope that anyone can help me...i would appreciated it.

image.jpg
 
Last edited:

turny

VIP Member
Mar 17, 2010
104
0
#JungleFlasher
you can see from the screenshots the drive properties are not correct in jungleflasher
there is some kind of corruption,
try the new pcb or another drive see if that shows correctly
it could be corrupted fw on the pcb, bad sata lead or x360usbpro dying
you need to do some basic fault finding to why the data is being corrupted.
 

Partykangeroo

Noob Account
May 3, 2015
5
0
i now linked up the new pcb (ltu2) and the same problem...

this is the log..

JungleFlasher 0.1.95 Beta (321)


Session Started Fri May 08 20:09:00 2015






This is a 32 bit process running on 2 x 32 bit CPUs


X360USB PRO detected, Version 0.20






Found 1 I/O Ports.


Drive type Un-determined


Found 1 Com Ports.


Found 4 windows drives C: D: E: F:


Found 2 CD/DVD drives D: F:






Found 1 Com Ports.


Drive type Un-determined










0000: 05 80 00 32 1B 00 00 00 - 10 4C 04 53 20 20 20 20 ...2.....L.S


0010: 04 47 2D 31 36 44 32 53 - 20 20 20 20 20 20 20 20 .G-16D2S


0020: 30 32 35 31 30 43 01 30 - 01 30 04 36 30 38 03 47 02510C.0.0.608.G


0030: 37 33 38 38 30 38 30 30 - 33 34 38 20 20 20 00 00 73880800348 ..


0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................


0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................


0060: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................


0070: 00 00 00 00 ....






Sending Vendor Intro to port 0x0000


Status 0x11


Re-sending Vendor Intro:


..................................


Device Intro failed!






SlimKey extraction failed!

i almost never used the x360usbpro...why should it be dying?
tried different sata cable...
i don't get it...why can't it be simple for me?...
 

turny

VIP Member
Mar 17, 2010
104
0
#JungleFlasher
it seems to me in that log you are trying to extract key from the new ltu pcb
new pcb has no information that is revelant to your system
ltu pcbs are based on phat hardware you cant use slim methods like slimkey
hence this line in your log 0020: 30 32 35 31 30 43 01 30 - 01 30 04 36 30 38 03 47 02510C.0.0.608.G
02510c is a phat liteon fw which is probably installed for testing purposes at the pcb factory
To use a ltu pcb you are going to have to rgh the system.
 

Partykangeroo

Noob Account
May 3, 2015
5
0
Oh sorry...Turny asked to try the new pcb...that is what i did..
i bought the pcb to replace the original one because i want to use my backup games.
but i first need to extract te key of the original pcb..but that is not working..
This is the log of the original pcb..


Session Started Fri May 08 20:48:48 2015






This is a 32 bit process running on 2 x 32 bit CPUs


X360USB PRO detected, Version 0.20






Found 1 I/O Ports.


Drive type Un-determined


Found 1 Com Ports.


Found 4 windows drives C: D: E: F:


Found 2 CD/DVD drives D: F:






Drive type Un-determined










0000: 05 80 00 32 1B 00 00 00 - 10 4C 04 53 20 20 20 20 ...2.....L.S


0010: 04 47 2D 31 36 44 34 53 - 20 20 20 20 20 20 20 20 .G-16D4S


0020: 30 32 32 35 00 00 00 00 - 00 00 00 00 00 00 00 00 0225............


0030: 00 00 00 00 01 30 01 30 - 00 00 00 00 00 00 00 00 .....0.0........


0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................


0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................


0060: 04 37 31 34 03 47 30 33 - 34 38 31 30 30 30 30 56 .714.G034810000V


0070: 34 20 20 20 4






Sending Vendor Intro to port 0x0000


Status 0x11


Re-sending Vendor Intro:


.......................................


Device Intro failed!






SlimKey extraction failed!
 

ablegepu

VIP Member
Jan 3, 2014
929
0
Alabama U.S
it seems to me in that log you are trying to extract key from the new ltu pcb
new pcb has no information that is revelant to your system
ltu pcbs are based on phat hardware you cant use slim methods like slimkey
hence this line in your log 0020: 30 32 35 31 30 43 01 30 - 01 30 04 36 30 38 03 47 02510C.0.0.608.G
02510c is a phat liteon fw which is probably installed for testing purposes at the pcb factory
To use a ltu pcb you are going to have to rgh the system.
I don't know loads about it but I believe he is trying to slimkey a d4s ofw which is where he is having problems, not a d2s.
 

Partykangeroo

Noob Account
May 3, 2015
5
0
This is the one i ordered...
1 x LTU2 PCB voor LiteOn DG-16D4S DG-16D5S Xbox 360 Slim (LTU2PCB) = €20.00
------------------------------------------------------

 

turny

VIP Member
Mar 17, 2010
104
0
#JungleFlasher
I don't know loads about it but I believe he is trying to slimkey a d4s ofw which is where he is having problems, not a d2s.
yes, I was explaining the failure of slimkey on the second log on the new pcb,
maybe the original pcb is actually a replacement pcb also, not a stock d4s pcb hence the slimkey failure,
It is difficult to help when you are not getting the whole story,
a picture of the original pcb would be nice.