can someone please help with this i have tried everything and had some top help but still no joy??? rom ver 47 gdr 312ol
HITACHI NON-79 can't get the hitachi to assign a drive letter
- Thread starter brett1
- Start date
vegaslightsss
VIP Member
Can you please provide more information. Also if not in jungleflasher, go to your control panel in your pc and look for device manager. Once open click action and press scan for hardware changes. Jf also has a scan button if you forgot to press it.
If you didnt Run Jungleflasher as "Administrator" then you have to go to the device manager to scan for hardware changes.If you did tick "Run as Administrator" then jungleflasher will do it for you. But vegas is correct, you need to provide more information.
ok ran as admin, all seems to be fine but can't get the drive to show in the top drive box on the hitachi tab sorry guys
xbox360 hacker
BANNED
vegaslightsss
VIP Member
vegaslightsss
VIP Member
Make sure you dont have the "libusb0.dll" in the JF root folder. If you are using X360USB you don't want that file together with jungleflasher.exe in the same folder. I was having the same problem until i took it out Any questions, there is a lot more info about it on the latest JF Manual (on subfolder Documentation). Good Luck.
I had one last week where I had to close and reopen JF after putting it in Mode B. It was assigned a letter as soon as I reopened JF
i normally have to eject the drive once i get mode b then it assigns a drive letter, but only when i do a 46/47. try that?
BL4K3Y
VIP Member