LITEON 74850 cant get the key

yuvalyz

Full Member
Dec 9, 2011
39
0
so after my first drive died while trying to get the key from it i fried him
i bougth a new drive
but now when im trying to getout the key every time i get an error ive tried some mthods and none seems to work -
i am allways geting the fail key ext.. after im trying to power cycle
im useing a ck3L + probe3 my xbox is fat jesper
JungleFlasher 0.1.90 Beta (293)

Session Started Fri May 04 13:26:37 2012



This is a Wow 64 process running on 2 x 64 bit CPUs

portio64.sys Driver Installed

portio64.sys Driver Started, thanks Schtrom !

Found 4 I/O Ports.

Found 1 Com Ports.

Found 5 windows drives A: C: D: E: F:

Found 2 CD/DVD drives E: F:



Drive is Lite-On..

Drive is Lite-On..

Sending Vendor Intro to port 0xDC00

Status 0x51

Re-sending Vendor Intro:

..............................

Serial flash found with Status 0x52



Extracted drive key failed Verification !





PhatKey extraction failed!



Drive is Lite-On..

Sending Vendor Intro to port 0xDC00

Status 0x51

Re-sending Vendor Intro:

....................

Serial flash found with Status 0x52



Extracted drive key failed Verification !





PhatKey extraction failed!



Drive is Lite-On..

Sending Vendor Intro to port 0xDC00

Status 0x51

Re-sending Vendor Intro:

....................

Serial flash found with Status 0x52



Extracted drive key failed Verification !





PhatKey extraction failed!
 
Last edited:

doe1200

VIP Member
Feb 21, 2011
460
48
northern ireland
did you get your dummy bin of your old drive before it fried because you will need it,so you can flash it to the replacement drive,look here Liteon DG-16D2S 74850C if you cant get your dummy bin of your fried drive you will need to send it to someone like teajunkie
 
Last edited:

ball00

VIP Member
Nov 8, 2011
633
0
France
Are you actually trying to get the key off the new drive? If so you're mistaken. Either it's second hand and has a key that relates to someone elses console, not your's; or it's shipped blank if it's new; and thus has no firmware or key on it anyway.

As the above ^poster says you have to get the key off your old drive and inject it to the new one. If you can't do this either send the drive to someone who can or you can RGH the console dependant on type of console and the dash it's on to get the correct drive key.
 

yuvalyz

Full Member
Dec 9, 2011
39
0
so i cant do anything about it ?
my old drive does not apper in my pc when it connected so i heve no accses to him

---------- Post added at 10:48 ---------- Previous post was at 10:47 ----------

bummer thet i didnt kneow that before if so i didnt order the replacment drive
another 20bucks gone ahhh
 

yuvalyz

Full Member
Dec 9, 2011
39
0
i dont know how i fired it
i hookd it in the correct why - green up
the only thing that might been wrong is that i maybe tuch the PCB with power on
the board seems to be ok but the big cheep is geting to hot for an electronic
 
Jun 4, 2010
3,094
0
Now you spoof it into your replacement drive with your desired firmware, stock or LT3.0.
 

yuvalyz

Full Member
Dec 9, 2011
39
0
one more thing my replacemnt drive hes not been updatet but my console dash is quite new
so does it metter?

---------- Post added at 09:39 ---------- Previous post was at 09:36 ----------

does this ok ?
ive turn him back into his OFW
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

JungleFlasher 0.1.90 Beta (293)

Session Started Thu May 10 19:26:41 2012



This is a Wow 64 process running on 2 x 64 bit CPUs

portio64.sys Driver Installed

portio64.sys Driver Started, thanks Schtrom !

Found 4 I/O Ports.

Found 1 Com Ports.

Found 5 windows drives A: C: D: E: F:

Found 2 CD/DVD drives E: F:



Drive is Lite-On..

Loading firmware file C:\Users\Yuval\Desktop\JungleFlasher v0.1.90 Beta (293)\1\Dummy.bin

MD5 hash: 73c682419d78df4dfe855b5fe5a62d47

Inquiry string found

Identify string found

Drive key @ 0xA030 494C2FC1B85EBDE033267FC7C685436C

Firmware Osig: [PLDS DG-16D2S 0251]

Firmware is: PhatKey Extract

Loading firmware file C:\Users\Yuval\Desktop\JungleFlasher v0.1.90 Beta (293)\firmware\orig-02510C-1c000.bin

MD5 hash: e7e0f802769fd80329784ca4b512f1a9

Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF

Firmware Osig: [PLDS DG-16D2S 0251]

Firmware is: Stock

Spoofing Target

DVD Key copied to target

Target is LT - ID strings not copied to Target

Serial data already matches



Target rev is LT 02510C, serial info not copied
 

yuvalyz

Full Member
Dec 9, 2011
39
0
look im realy clueless what now ?
any step by step guide ot something ?
those videos did not help at all
 
Jun 4, 2010
3,094
0
What format have you got your key in? Just the key on it's own or the whole dummy.bin extract?
 

yuvalyz

Full Member
Dec 9, 2011
39
0
ive got dummy.bin + inqure.bin+key.bin
all from the orignel drive [the one that "died"]

---------- Post added at 10:11 ---------- Previous post was at 10:10 ----------

look ive got the correct files i just dont know how to transfer them to the new drive
by the why if i flash the new drive then i need to update him ? so the flash will be removed ?
 
Jun 4, 2010
3,094
0
Load the dummy.bin as the source firmware, providing the old drive was updated to 0251 then it should automatically auto prompt you to load LT3.0. If not then load 0251 LT3.0 as the target firmware manually.

Next, go to the MTK tab and press the liteon erase, press yes to the warning prompts and then power cycle the drive.

If all goes well your drive should be in vendor mode now, if so then press write and let JF do it's business. Once completed press outro and it's all done.