can't press lite-on erase or any button in jungelflash

[rambo1992]

i can't press any button after i have selected open source firmware and open traget firmware and selected I/O port plz help View attachment 10550

 

[BL4K3Y]

The correct port isn't selected so your drive won't show up.

If you are using onboard SATA, ensure AHCI and RAID are disabled in the BIOS and use the lowest numbered SATA port possible on your motherboard - don't forget to tick "Include non-IDE Ports".

An X360USB Pro would solve all these problems .

 

[Martin C]

That's because your I/O port isn't your DVD drive - you can see that from the bottom left information.

I suggest getting help on #jungleflasher on IRC - this is a T-X support forum.