SAMSUNG MS28 Can't read from ms28

[wilster]

Hi,

I have been trying to get key from my drive, I'm having a few problems, I cannot read from the drive at all.
I have managed to get it into vender mode with probe 3 but it cant read due to unknown flash, I'm using x360USB Pro and have also tried a VIA card.
The main problem is when I power on the drive it seems to be inactive, I can't eject it and It can't be found for about 5 minutes, as this drive seems fault I need to replace it, the name that shows in the drive seems wrong too.

Thanks in advance,

David.

http://s5.postimage.org/5gyxmqmon/Capture.jpg
http://s5.postimage.org/6kj1yp7br/Capture2.jpg

 

[jsinger47]

as the tutorial says, when you get unknown flash chip, press intro/device id again

 

[Martin C]

I would also check your SATA cable as I think it's more of a comms issue.

Every other character in the device ID is wrong.

"m`2 " should be "ms28" or "ms25".

 

[wilster]

Just like to say a big thanks to jsinger47 did a re intro and it worked, also a change of sata lead, thanks a lot for all your help.