Everytime I look at your JRP it looks more like a clone, it's pretty different to mine, maybe that's the issue
Can't read nand?
- Thread starter hinmar
- Start date
It's a real one! I checked it on; serial.team-xecuter.com.
But i'f it's a fake one, then why does my xbox not start?
I know what yellow wire is . And for me Bad ground is common to bad blocks
Have you resoldered the wires yet
Have you resoldered the wires yet
xzanox
VIP Member
if you want, you can send the board to me, I'll check it to see if I can read the nand for you. If you only provide shipping back and forth, I won't charge anything. Rest of installation you'll have to do yourself if I'm able to read the nand.
http://team-xecuter.com/forums/thre...ing-NAND-x-Guide-results-Advice-needed-please
http://team-xecuter.com/forums/threads/77908-Troubleshooting-NAND-X-JRP-Connection-Problems
I wonder if the remaining QSB could be causing the trouble
I take no responsibility if removing it does not fix your problem
then lets try the stand alone ECC file to get xell dont worry about creating a image for now
You can also try soldering the wires for nand under the motherboard
http://team-xecuter.com/forums/threads/147878-Xecuter-CR4-XL-Magic-SMC-Files-for-RGH2
http://team-xecuter.com/forums/threads/77908-Troubleshooting-NAND-X-JRP-Connection-Problems
I wonder if the remaining QSB could be causing the trouble
I take no responsibility if removing it does not fix your problem
then lets try the stand alone ECC file to get xell dont worry about creating a image for now
You can also try soldering the wires for nand under the motherboard
http://team-xecuter.com/forums/threads/147878-Xecuter-CR4-XL-Magic-SMC-Files-for-RGH2
What does the console do now when you attempt to start it
You might have a problem with the south bridge chip
How did you get a donor nand with out getting xell
If you need a jasper big block nand for testing the read write function let me know
Your console at this point will not boot start anything but xell with the CR-4 installed
When your knew its almost impossible not to destroy the QSB when removing
The rule for removing is destroy the QSB not the motherboard
You might have a problem with the south bridge chip
How did you get a donor nand with out getting xell
If you need a jasper big block nand for testing the read write function let me know
Your console at this point will not boot start anything but xell with the CR-4 installed
When your knew its almost impossible not to destroy the QSB when removing
The rule for removing is destroy the QSB not the motherboard
Last edited:
I'm with STUCKNVEGAS on this one,hit up your nand read points from the underside of the board , this usually works when topside is troublesome or has a glitch chip already installed. The QSB's can give you problems but only if they aren't installed properly or have bad connections.
Yes this too .... also make sure your flux is non conductive , screwed up with this once before as well.
Got all the qsb's from the board! still the same error's.
When I try to write I get error 202!
I also tried the nand wires at the bottom, but that doesn't matter
When I try to write I get error 202!
I also tried the nand wires at the bottom, but that doesn't matter