Cant seem to read retail nand

[Furiiious]

I want to read my retail nand from my demon but every time I do after reading it says its an RGH2 xeBuild

The reason I want to do this as its been offline and been booted a few times with no drive and want to unflag the nand just to be on the safe side

 

[Krafter]

We need more information in order to help you. Like your J-Runner logs. Are you even switching NANDs? You logs will show all that.

 

[Furiiious]

I read from the xbox side

Create a Retail side using that dump

But surely it should already be retail?

 

[BL4K3Y]

I'm confused.

I just read your first post and it sounds like you are reading the DemoN's NAND (which probably has an XeBuild image on it) and expecting it to be retail.

To "unflag" the NAND as you say, you can build a new retail image with a clean SECDATA.

 

[Krafter]

*sigh.......*. Logs will be very helpful.................

 

[Furiiious]

Yeahh i dont have the original nand with this console

so i wanted to read from the demon and get the retail and then create a clean one from that

 

[Furiiious]

I just redone what i did in the first place here is the logs

===================================================
10 June 2014 00:13:11

J-Runner v0.3 Beta (4) Started



Checking Files
Finished Checking Files
Current: XBOX
Switching to DemoN
Current: DemoN
Switching to XBOX
Reading Nand to C:\Users\Liam\Downloads\J-Runner v03 (1) Core Pack\J-Runner\output\nanddump1.bin
XBOX360
Hardware   : Demon Slim
Firmware   : 1.4
Flash ID   : 0x73AD Hynix (16MiB - Small block)
Flash Size : 0x400 blocks of 0x4200 bytes
Invalid Blocks : 0xF6 
Reading Nand
Done!
in 0:25 min:sec

Initializing nanddump1.bin..
Trinity
RGH2 Selected
Nand Initialization Finished
Retail Selected
Load Files Initiliazation Finished
16747
Started Creation of the 16747 xebuild image
KV Info saved to file
---------------------------------------------------------------
     xeBuild v1.12.659
---------------------------------------------------------------
base path changed to C:\Users\Liam\Downloads\J-Runner v03 (1) Core Pack\J-Runner\xeBuild
---- { Image Build Mode } ----
building retail image

---------------------------------------------------------------
C:\Users\Liam\Downloads\J-Runner v03 (1) Core Pack\J-Runner\463645702705\updflash.bin image built, info:
---------------------------------------------------------------
Kernel    : 2.0.16747.0
Console   : Trinity
NAND size : 16MiB
Build     : Retail
Serial    : 463645702705
ConsoleId : 019774988698
MoboSerial: 725665A120510275
Mfg Date  : 07/01/2010
CPU Key   : B23E6A4D030965E7ED4046F5BB1455CB
1BL Key   : DD88AD0C9ED669E7B56794FB68563EFA
DVD Key   : 6E0975ECCD55E97167FC13A2AE6EB966
CF LDV    : 11
KV type   : type2 (hashed - unchecked, master key not available)
---------------------------------------------------------------
    xeBuild Finished. Have a nice day.
---------------------------------------------------------------
Saved to C:\Users\Liam\Downloads\J-Runner v03 (1) Core Pack\J-Runner\463645702705
Image is Ready
Initializing updflash.bin..
Trinity
RGH2 Selected
Nand Initialization Finished
Comparing...
Bad Block ID  00F6 Found @ 0x03FF [Offset: 0x107BE00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 00F6 [Offset: 0x3F6C00]
Bad Blocks Remapped
Bad Block ID  00F6 Found @ 0x03FF [Offset: 0x107BE00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 00F6 [Offset: 0x3F6C00]
Bad Blocks Remapped

 

[BL4K3Y]

I just redone what i did in the first place here is the logs

===================================================
10 June 2014 00:13:11

J-Runner v0.3 Beta (4) Started



Checking Files
Finished Checking Files
Current: XBOX
Switching to DemoN
Current: DemoN
Switching to XBOX
Reading Nand to C:\Users\Liam\Downloads\J-Runner v03 (1) Core Pack\J-Runner\output\nanddump1.bin
XBOX360
Hardware   : Demon Slim
Firmware   : 1.4
Flash ID   : 0x73AD Hynix (16MiB - Small block)
Flash Size : 0x400 blocks of 0x4200 bytes
Invalid Blocks : 0xF6 
Reading Nand
Done!
in 0:25 min:sec

Initializing nanddump1.bin..
Trinity
RGH2 Selected
Nand Initialization Finished
Retail Selected
Load Files Initiliazation Finished
16747
Started Creation of the 16747 xebuild image
KV Info saved to file
---------------------------------------------------------------
     xeBuild v1.12.659
---------------------------------------------------------------
base path changed to C:\Users\Liam\Downloads\J-Runner v03 (1) Core Pack\J-Runner\xeBuild
---- { Image Build Mode } ----
building retail image

---------------------------------------------------------------
C:\Users\Liam\Downloads\J-Runner v03 (1) Core Pack\J-Runner\463645702705\updflash.bin image built, info:
---------------------------------------------------------------
Kernel    : 2.0.16747.0
Console   : Trinity
NAND size : 16MiB
Build     : Retail
Serial    : 463645702705
ConsoleId : 019774988698
MoboSerial: 725665A120510275
Mfg Date  : 07/01/2010
CPU Key   : B23E6A4D030965E7ED4046F5BB1455CB
1BL Key   : DD88AD0C9ED669E7B56794FB68563EFA
DVD Key   : 6E0975ECCD55E97167FC13A2AE6EB966
CF LDV    : 11
KV type   : type2 (hashed - unchecked, master key not available)
---------------------------------------------------------------
    xeBuild Finished. Have a nice day.
---------------------------------------------------------------
Saved to C:\Users\Liam\Downloads\J-Runner v03 (1) Core Pack\J-Runner\463645702705
Image is Ready
Initializing updflash.bin..
Trinity
RGH2 Selected
Nand Initialization Finished
Comparing...
Bad Block ID  00F6 Found @ 0x03FF [Offset: 0x107BE00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 00F6 [Offset: 0x3F6C00]
Bad Blocks Remapped
Bad Block ID  00F6 Found @ 0x03FF [Offset: 0x107BE00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 00F6 [Offset: 0x3F6C00]
Bad Blocks Remapped

Post a screen shot showing J-Runner with the NAND loaded please.

J-Runner has been coded to select the most appropriate image type based on the source input.

If you load a source NAND image with a split CB, RGH2 will be selected automatically.