can't update via ck3i

A

advapi

Full Member
Sep 30, 2011
38
0
Italy
Hello,
I've tried to update using ck3i and flash magic but with no luck... I've got a nand-x , original upgrade cable and a ck3i... followed the instruction... always getting a

---------------------------
Flash Magic
---------------------------
Operation Failed. Failed to autobaud - step 1. See http://www.flashmagictool.com/autobaud.html
---------------------------
OK
---------------------------

Any suggestion?
 
explorer66

explorer66

VIP Member
May 10, 2009
205
0
newcastle uk
im in the same boat as you , using a ck3i tried for hours checked and re checked the cables
but all i get is that failed to autobaud
looking through the other post's it looks like it's starting to show up a lot :(
 
Last edited:
Blkmoose

Blkmoose

Full Member
Jan 19, 2011
69
0
Michigan,USA
explorer66 said:
im in the same boat as you , using a ck3i tried for hours checked and re checked the cables
but all i get is that failed to autobaud
looking through the other post's it looks like it's starting to show up a lot :(
Click to expand...
I'm having the same issues....led stays on even when switch is turned on/off....i was able to flash drives though.It opens the drives sometimes.I tried 2pcs and my laptop :crazy: nothing....I have all the tools to start the rgh, just stomped by this.after hooking up all the wires and using the usb pro trying to tick additional features in Jungle flasher ...nothing:confused: I have the drivers as well . I ordered another one to get the party started;)...Ill know soon if im just stupid or not :tongue:
 
M

mm53668

I was able to get mine to update by raising the BAUD rate - not sure if it hurts anything but it updated and verified - I still couldn't program my coolrunner but was able to still read the nand so I'm assuming the update was ok
 
J

jhan1

VIP Member
Jan 13, 2011
223
0
mm53668 said:
I was able to get mine to update by raising the BAUD rate - not sure if it hurts anything but it updated and verified - I still couldn't program my coolrunner but was able to still read the nand so I'm assuming the update was ok
Click to expand...
What value did you set for Baud then?
 
B

bigO73

VIP Member
Sep 23, 2010
392
0
Tampa Bay, Florida
jhan1 said:
What value did you set for Baud then?
Click to expand...
Yeah I would like to know also, I went up to like 14k but didnt want to take a chance at screwing something up.

---------- Post added at 21:47 ---------- Previous post was at 21:45 ----------
mm53668 said:
I was able to get mine to update by raising the BAUD rate - not sure if it hurts anything but it updated and verified - I still couldn't program my coolrunner but was able to still read the nand so I'm assuming the update was ok
Click to expand...
What's the purpose then? The whole idea is to update the nandx to program the coolrunner.
 
A

advapi

Full Member
Sep 30, 2011
38
0
Italy
I've tried 12/10/14.745 ... nothing working... I' ve also tried to run in compatibility mode, start without enforcing driver (win7 64bit) ... no way..... mine version of ck3i is 002 ... anyone successully upgraded?
Thanks
 
You must log in or register to reply here.