CFW not booting

[Rockinguy23]

I’m getting this screen after updating SXOS and when I press the boot CFW the screen just goes blank. Please help me out. Thank you.

 

[imprezgc8]

I would download the boot.dat fresh from the site and replace the one on your SD with that and try again.

 

[AmaterasuOwned]

I have problem, trying boot CFW 2,6 but downloading only OFW, i try replace boot but dont helped

 

[KnightRiderX420]

make sure emunand is diabled and try again
i had same problem till i did that and it works now

 

[AmaterasuOwned]

make sure emunand is diabled and try again
i had same problem till i did that and it works now

How i can disable emunand?

 

[KnightRiderX420]

load the payload with your dongle and while doing it hold down vol+ it will oad the sxos menu then look ABOVE THE CFW BUTTON click where it says emunand enabled it will chaqnge to disablled and then click cfw it should load.. giver it a few seconds

 

[AmaterasuOwned]

load the payload with your dongle and while doing it hold down vol+ it will oad the sxos menu then look ABOVE THE CFW BUTTON click where it says emunand enabled it will chaqnge to disablled and then voila

So thats a problem, boot menu bot loading

 

[KnightRiderX420]

if you have the new 2.6 boot.dat file on your sd card and then you inject the payload.bin file known as sx loader 1.0 correctly while holding the vol+ button the menu should come up... the sx loacder file is called pay;load.bin. do you have sx pro or just a license if only a license you need an injector if you have no payload injector use tegra rcm gui google itmake sure you press and hold vol+ after injecting payload
i cant garuntee this method all i know is it worked for me,
yes i will say default emunand enabled loads every time as well it needs to save setting somehow

 

[Condemned87]

Had the same issue a few month before. The solution was to format the SD card again. Since then everything works fine. Please try it.

 

[AmaterasuOwned]

if you have the new 2.6 boot.dat file on your sd card and then you inject the payload.bin file known as sx loader 1.0 correctly while holding the vol+ button the menu should come up... the sx loacder file is called pay;load.bin. do you have sx pro or just a license if only a license you need an injector if you have no payload injector use tegra rcm gui google itmake sure you press and hold vol+ after injecting payload
i cant garuntee this method all i know is it worked for me,
yes i will say default emunand enabled loads every time as well it needs to save setting somehow

Thank you really worked now