how about being able to change the audio heard when the flubber is displayed Since most other parts of the boot sequence can be modified
Change Flubber Audio clip?
- Thread starter zxieus
- Start date
spoofed 9 series to 7 series the way braveheart 43 explained
i have a 9 series ive pulled the key but messed up the board. I have a Brand new 7 series so ive took the OFW from 9 series, loaded as source, then loaded ix LT (9 series one) as target, spoof source to target. then erased and writen to the 7 series
but now for some strange reason when i put a disc in , the drive spins very very fast and dosnt slow down and that is with an original disc, ive also tryed another 7 series liteon and im getting the same problem, any ideas?
i have a 9 series ive pulled the key but messed up the board. I have a Brand new 7 series so ive took the OFW from 9 series, loaded as source, then loaded ix LT (9 series one) as target, spoof source to target. then erased and writen to the 7 series
but now for some strange reason when i put a disc in , the drive spins very very fast and dosnt slow down and that is with an original disc, ive also tryed another 7 series liteon and im getting the same problem, any ideas?
Re: spoofed 9 series to 7 series the way braveheart 43 expla
did it auto load LT or did you load it manually?
try flashing OFW back to the drive see if originals play ok then!
did it auto load LT or did you load it manually?
try flashing OFW back to the drive see if originals play ok then!
Re: spoofed 9 series to 7 series the way braveheart 43 expla
it auto loaded mate
load both source and target as ofw?
it auto loaded mate
load both source and target as ofw?
Re: spoofed 9 series to 7 series the way braveheart 43 expla
right loaded ofw back and drive is still spinning but nowhere near as fast as before , it was really loud too, quite quite now but dont seem to be slowing down
right loaded ofw back and drive is still spinning but nowhere near as fast as before , it was really loud too, quite quite now but dont seem to be slowing down
Re: spoofed 9 series to 7 series the way braveheart 43 expla
Load OFW as source, then instead of autoloading the LT firmware, select the LT firmware for the knackered drive. Then flash as usual. I had a faulty 7 series liteon and a brand new 8v1 series laying around, so used my OFW from my 7 series and flashed 7 series LT to my 8v1 series drive and everything worked great... But by the look of it, you've already done that. Could it be that the OFW from the 9 series has something wrong with it?
Load OFW as source, then instead of autoloading the LT firmware, select the LT firmware for the knackered drive. Then flash as usual. I had a faulty 7 series liteon and a brand new 8v1 series laying around, so used my OFW from my 7 series and flashed 7 series LT to my 8v1 series drive and everything worked great... But by the look of it, you've already done that. Could it be that the OFW from the 9 series has something wrong with it?
Re: spoofed 9 series to 7 series the way braveheart 43 expla
no because ive flashed the ofw to the 7 series now and it plays ok but the fan seems to be working alittle more quicker , so tryed to spoof the other drive with 9 series but manually this time , just got it from xbins and the same happens the drive spins like mad as if its going to take off i was wondering because the pcb board is 7 series wouldent i need to use that rather than 9, i no my drive key is from a 9 so probs not.
no because ive flashed the ofw to the 7 series now and it plays ok but the fan seems to be working alittle more quicker , so tryed to spoof the other drive with 9 series but manually this time , just got it from xbins and the same happens the drive spins like mad as if its going to take off i was wondering because the pcb board is 7 series wouldent i need to use that rather than 9, i no my drive key is from a 9 so probs not.
Re: spoofed 9 series to 7 series the way braveheart 43 expla
just been to a friends and his seems to be spinning thee same , the fans i meen so its probs just because i still have the case off that it seems faster to me , but really cant understand why flashing with the 9 series lt makes my drive go mental.
im gona try the 7 series lt , will let you no in a couple mins if owt happens
just been to a friends and his seems to be spinning thee same , the fans i meen so its probs just because i still have the case off that it seems faster to me , but really cant understand why flashing with the 9 series lt makes my drive go mental.
im gona try the 7 series lt , will let you no in a couple mins if owt happens
Re: spoofed 9 series to 7 series the way braveheart 43 expla
same thing reads the disc but then spins like fuk and crashes the xbox
same thing reads the disc but then spins like fuk and crashes the xbox
Re: spoofed 9 series to 7 series the way braveheart 43 expla
Did the 7 series liteon you're trying to flash work properly in the first place? All Liteons are exactly the same, it's just the firmware that differs. Taking the firmware from one liteon then placing into another shouldn't effect is functionality one bit.
Did the 7 series liteon you're trying to flash work properly in the first place? All Liteons are exactly the same, it's just the firmware that differs. Taking the firmware from one liteon then placing into another shouldn't effect is functionality one bit.
Re: spoofed 9 series to 7 series the way braveheart 43 expla
wen the ofw is on the drive it works fine but as soon as lt on the drive goes mad
wen the ofw is on the drive it works fine but as soon as lt on the drive goes mad
Re: spoofed 9 series to 7 series the way braveheart 43 expla
Have you tried ixtreme 1.61 or another firmware? If that works, then the problem is with LT. Try downloading it again from another source.
Have you tried ixtreme 1.61 or another firmware? If that works, then the problem is with LT. Try downloading it again from another source.
Re: spoofed 9 series to 7 series the way braveheart 43 expla
just tryin 1.61 now , but its not safe online isit?
just tryin 1.61 now , but its not safe online isit?
Re: spoofed 9 series to 7 series the way braveheart 43 expla
Not really, but if this works without your drive going crazy, then at least you know that it was the LT firmware causing the problem.
Not really, but if this works without your drive going crazy, then at least you know that it was the LT firmware causing the problem.
Re: spoofed 9 series to 7 series the way braveheart 43 expla
do i rename this ix161-934-fix.bin to this ix161-934.bin?
do i rename this ix161-934-fix.bin to this ix161-934.bin?
Re: spoofed 9 series to 7 series the way braveheart 43 expla
right tryed 1.61 and it worked
so deffo the lt firmware , i got it from xbins though so wouldent think owt would be wrong with it
right tryed 1.61 and it worked
so deffo the lt firmware , i got it from xbins though so wouldent think owt would be wrong with it
Re: spoofed 9 series to 7 series the way braveheart 43 expla
Thats a fair assumption, its happened a couple of times to me. If you would like me to send the firmware I have, then pm me.
Thats a fair assumption, its happened a couple of times to me. If you would like me to send the firmware I have, then pm me.
Re: spoofed 9 series to 7 series the way braveheart 43 expla
mr-crix pointed out to me how to get the firmware from Jungle Flasher IRC and tryed that once downloaded and worked fine first time, i'll always get firmware from there now and xbins will be deleted , thanks alot guys for all ur help and a big thanx to mr-crix top man.
mr-crix pointed out to me how to get the firmware from Jungle Flasher IRC and tryed that once downloaded and worked fine first time, i'll always get firmware from there now and xbins will be deleted , thanks alot guys for all ur help and a big thanx to mr-crix top man.
Re: spoofed 9 series to 7 series the way braveheart 43 expla
ahhhh - "the Munchkin" - Yes Mr-crix is a helpful little fellow!
ahhhh - "the Munchkin" - Yes Mr-crix is a helpful little fellow!