Changing boot sounds on Xbox Slim or Phat to any sound you want

JtagMan

Full Member
Sep 4, 2011
61
0
I cant create a thread in tutorial section yet but I have seen several people ask about this.

Here is a short Video of FAT falcon Xbox360 Booting and Ejecting using theXbox360 slim Sounds.


[ame="http://www.youtube.com/watch?v=MbVBfRlE2JU"][WIP]Fat Xbox360 Booting Slim Sounds - YouTube[/ame]


INFO:
Works on Any Xbox360 Modded or Not......
Plays 5+ Different Sound,s it can Be Voice or anything
Uses .MP3 and .WMA audio Files
Holds Up to 210 Seconds of Audio
Easy To Upgrade The Sound Files Via USB and .EXE app
make sounds Short or as long as u want up to 210 seconds total
very little Soldering Required-no real skill needed.


Tutorial:
-----------------------------------------------------------------------------------------------

Things u will need for this mod..............

1. Sound mod board like this:
http://www.ebay.ca/itm/200s-USB-mod...701?pt=LH_DefaultDomain_0&hash=item35ba7955dd

2. Mini usb Cable

3. Custom Sounds and Board Programmer App http://www.mediafire.com/?febyx2oyynm3ogf
or any sound you want.

Lets get started....

1.Prepping the Sound mod board for install
First Remove all three Batteries from the Sound mod board and Bend up the Activate Switch so there is no contact with the Circuit board..

Example Pic



2.Connecting the Sound mod Board
Connect everything as showed in the diagram Except only connect 1 wire to the pins to choose eject sounds.

Example pic




3.Programming your Sound mod Board
Plug-in your Xbox360 Power Brick Then connect your Mini USB Cable to the Sound mod Board and the other end to the pc USB Port.
Install the sound loader you downloaded from me earlier and Open it and Add The Sounds you would Like.
Also Change the Settings Exactly Like the Picture Below Shows.

Example pic


When Ready Just Click Write and if all Goes Well it will say Success...

There you go your Xbox360 Should Now Be Booting/ejecting Custom sounds....
Now Just figure out where you would like the sound mod Board Placed and Clean up......

Here is an example.



TIP..

PIN 1,3,5,7,9 are used For the Wire For different Sounds and the pin jumper is for boot sounds
PIN 2,4,6,8,10 are Basically Just Ground's

Thanks to livinglegend187
 

TilVl

VIP Member
May 11, 2011
1,383
0
Good sh*t. There was a thread on this some where. Thanks a bunch. Not something I would use but awesome job a lot of people will be happy.

Sent from my SGH-T839 using Tapatalk 2
 

TilVl

VIP Member
May 11, 2011
1,383
0
Sure it will work I wonder if the sounds would play together.

Sent from my SGH-T839 using Tapatalk 2
 

JtagMan

Full Member
Sep 4, 2011
61
0
nice part is you can use any sound. music,sound from favorite movie,even your own recorded voice.
 
Aug 25, 2010
2,149
0
Cornwall England
yea on a slim you have to disconnect the onboard speaker or both sounds play
awesome! maybe a dumb question. but wheres the sound come from on a normal slim (not special edition)
I'm all over this is I disable that sound.

have a slim with fart noises

oooo the laughs I shall have
 

JtagMan

Full Member
Sep 4, 2011
61
0
I didn't disconnect my on-board speaker on my slim my audio had about a 1 sec delay at beginning so the beep play seamlessly into my audio
 
Aug 25, 2010
2,149
0
Cornwall England
That shoould be the speaker in the red square.

Not my picture. Got it off google.
nice one, just put my ear to it on a mobo and sounds defo coming from that.
going to try and find a UK seller. don't like waiting lol

---------- Post added at 21:08 ---------- Previous post was at 21:07 ----------

this has been my number 1 thing I've wanted to do to my slim for a loooong time. my hat goes off to you for finding this
 

TilVl

VIP Member
May 11, 2011
1,383
0
Yea its pretty epic. I have a gears slim, so not to worried changing sounds.

If I had a regular slim defiantly would.

Sent from my SGH-T839 using Tapatalk 2