Changing X3 Config Live Booting Button
- Thread starter Amro90
- Start date
Martin C
VIP Member
Because my Little Brother knows how to boot to Config Live and i'm afraid he will change the settings.. I have solved the problem.. I'm using password protection now..
Martin C
VIP Member
drive not recognised
Model DG-16d2s-09c
FW Ver: 9345oc
You can ignore this post because I have realized that I was wrong on the brand.
Via looking at photos of trays I was under the impression that it was a benq and set myself up under those terms before even opening the product… After some time of aggravation I realized that it was truly a 1009 lite-on model… ïŒ I dunno if I feel like going through all the extra work just to be able to play my back up games even though I do tend to lend my games out and have them ruined often maybe I will just ease up on being so generous… anyhow thanks anyway to those that viewed this before my edit …
I am new to this process and am unable to get Jungle flasher (1.74) to identify my disk drive… I have taken all the steps I know here’s a quick list of what I’ve done after countless videos and tuts…
Purchased wires and prepped tools
Put LT firmware in folder
Dissembled console shell & split computer open…
Found sata port (only found 1 in my computer) linked it to 360
Turned on machines and set 360 to b mode (or atleast I think I did… I preformed the semi-open trick)
Cycled through ports and found none to match the vendor code everyone else seems to get…
My sata ones state No Drive Detected…
Anyhow I’m stuck…
Currently running framework 3.5, windows xp sp3, Intel(r) 82801eb ultra ata – 24d1
JF 1.74 & Benq LT 1.1
(says 6 I/o ports, 1 com, 4 drives)
I also installed portio32 but dunno if I am suppose to uninstall anything…
Trying dosflash32 I get a status 0x51…
Going through msinfo32.exe … it states my I/O Port is 0x0000ffe0-0x0000ffef
Model DG-16d2s-09c
FW Ver: 9345oc
You can ignore this post because I have realized that I was wrong on the brand.
Via looking at photos of trays I was under the impression that it was a benq and set myself up under those terms before even opening the product… After some time of aggravation I realized that it was truly a 1009 lite-on model… ïŒ I dunno if I feel like going through all the extra work just to be able to play my back up games even though I do tend to lend my games out and have them ruined often maybe I will just ease up on being so generous… anyhow thanks anyway to those that viewed this before my edit …
I am new to this process and am unable to get Jungle flasher (1.74) to identify my disk drive… I have taken all the steps I know here’s a quick list of what I’ve done after countless videos and tuts…
Purchased wires and prepped tools
Put LT firmware in folder
Dissembled console shell & split computer open…
Found sata port (only found 1 in my computer) linked it to 360
Turned on machines and set 360 to b mode (or atleast I think I did… I preformed the semi-open trick)
Cycled through ports and found none to match the vendor code everyone else seems to get…
My sata ones state No Drive Detected…
Anyhow I’m stuck…
Currently running framework 3.5, windows xp sp3, Intel(r) 82801eb ultra ata – 24d1
JF 1.74 & Benq LT 1.1
(says 6 I/o ports, 1 com, 4 drives)
I also installed portio32 but dunno if I am suppose to uninstall anything…
Trying dosflash32 I get a status 0x51…
Going through msinfo32.exe … it states my I/O Port is 0x0000ffe0-0x0000ffef
Re: drive not recognised
^^^^ your sata mobo may not be compatible use a via sata card and read the jf tutorial about 10 times i think you may need to cos you have a liteon drive and your going to use benq LT
^^^^ your sata mobo may not be compatible use a via sata card and read the jf tutorial about 10 times i think you may need to cos you have a liteon drive and your going to use benq LT
Re: drive not recognised
also make sure the drive is in half way position to make sure the drive is in vendor mode or it wont show up
also make sure the drive is in half way position to make sure the drive is in vendor mode or it wont show up
Re: drive not recognised
YOU CAN IGNORE THIS POST!.... Should I have deleted it? I dunno if I feel like doing the extra work needed for the lite-on drive so...
YOU CAN IGNORE THIS POST!.... Should I have deleted it? I dunno if I feel like doing the extra work needed for the lite-on drive so...