Checklist for Corona V5

[geno360]

Hello everyone. I'm about 95% sure that I have a Corona V5. I won't know for sure until finals are over and I can crack open my slim. I'm basing my choices on the link I'll provide that's also from this site.

CR4 XL
CR4 CORONA QSB KIT
XECUTER POSTFIX ADAPTER V2 // I haven't been able to find this on modchipcentral. Any Thoughts?
DOUBLE SHIELDED PRO CPU RST CABLE - SLIM
DemoN

My goal is to be able to run some version of Linux on this machine. Probably Debian from some of what I've read. Something that will work with the 360's PPC architecture. I plan on using the Demon instead of the JR Programmer. It will be more expensive, but I like the idea of dual nand.

Is there anything else that I will need? Anything at all? I already have all the items I need to solder.

I thank you all in advance.

http://team-xecuter.com/forums/threads/147840-CR4-XL-SLIM-Corona-v3-v6-Install-Guide-%28RGH2-%29

 

[demolition22]

Watch this video, it'll be pretty close to identical to your install ( http://team-xecuter.com/forums/threads/147958-Live-Video-Stream-–-CR4-Demon-Install-) )
I wouldn't recommend using Linux for this as J-Runner (The program you will have to use) is a windows program and all the drivers for the demon are also made for windows. You will have to have a Post fix adapter to do your system, I also noticed that Modchip central doesn't have any listed.
As per where to get it youll either have to find someone on here that will sell you one, wait for Modchip Central to get more (If they ever do) or see if you can find one else where but be careful as there are fakes out there and they are terrible quality and probably wont work.