RGH Checklist to get me started

M

Martinbox

Junior Member
Jan 31, 2012
17
0
Sweden
Hey, oldie in xbox modding but new in the whole jtag/rgh and just wanted to see if someone could tell me if I'm ordering all the stuff I need :crazy:

  • Xecuter CoolRunner
  • Nand-X USB 360 Programmer Kit
  • Xecuter CK3 to NAND-X Update Cable
I've already got an old (uncased) CK3 PRO which should work with the Nand-x thingie if I'm not wrong.

Thanks for your time.
 
ball00

ball00

VIP Member
Nov 8, 2011
632
0
France
You'll need a coolrunner programming cable from the nand-x to coolrunner. Don't know if it's in the kit. Check with the supplier if the nand-x is already v3.0 if it is you don't need the ck3 to nand-x cable.
 
  • Like
Reactions: Martinbox
N

N.E.Modz

VIP Member
Sep 27, 2009
2,285
68
A.K.A daleh43
Martinbox said:
Hey, oldie in xbox modding but new in the whole jtag/rgh and just wanted to see if someone could tell me if I'm ordering all the stuff I need :crazy:

  • Xecuter CoolRunner
  • Nand-X USB 360 Programmer Kit
  • Xecuter CK3 to NAND-X Update Cable
I've already got an old (uncased) CK3 PRO which should work with the Nand-x thingie if I'm not wrong.

Thanks for your time.
Click to expand...

try karl @ bgamods, he has coolrunners, cables & qsb's cheaper than most places.

heres his site: http://www.bgamods.co.uk/index.php?route=product/category&path=59

he's well known on here, this is his post:
http://team-xecuter.com/forums/showthread.php?t=68879

dale:wink:
 
  • Like
Reactions: knowlzy10
M

Martinbox

Junior Member
Jan 31, 2012
17
0
Sweden
Awesome - big help!

I'm gonna order those things and follow this tutorial and hopefully I'll be golden ;)

---------- Post added at 14:59 ---------- Previous post was at 14:56 ----------
N.E.Modz said:
try karl @ bgamods, he has coolrunners, cables & qsb's cheaper than most places.

heres his site: http://www.bgamods.co.uk/index.php?route=product/category&path=59

he's well known on here, this is his post:
http://team-xecuter.com/forums/showthread.php?t=68879

dale:wink:
Click to expand...
Looks fine, but I can't seem to find the nand-x programmer but I might use that site if I'm gonna fix a friends box or so! Thanks
 
ball00

ball00

VIP Member
Nov 8, 2011
632
0
France
Yes but imo you shouldn't use jtag tool. It doesn't support the newest dashboard and has been a little buggy at times. I advise you use multibuilder instead to build your glitch image.
 
M

Martinbox

Junior Member
Jan 31, 2012
17
0
Sweden
Oh snap just visited this post again and you're not recommending JTAGTOOL - I used it to make a 14699 freeboot on my zephyr and everything worked just fine.

Care to elaborate what the downsides to using jtagtool are? or point me in the right direction?
 
D

DayvG

VIP Member
Apr 26, 2007
473
0
Gosport, UK
J

JayDee

Full Member
Mar 4, 2003
50
0
Sweden
Used jtagtool for my zyphyr and i did not get any booting at all (+5 minutes glitching and nothign happend. Wasted 1 hour on cheking other faults...)

Downloaded multibuilder and baaam, everything was ok on the first try, getting into FSD directly!

Noticed that the jtag tool freboot.bin keept info from 6bl/7bl patch1 intact in the nand (with 360 flash dump tool) whilst those areas where grayed out when cheking the nandflash.bin done with multibuilder.
 
M

Martinbox

Junior Member
Jan 31, 2012
17
0
Sweden
JayDee said:
Noticed that the jtag tool freboot.bin keept info from 6bl/7bl patch1 intact in the nand (with 360 flash dump tool) whilst those areas where grayed out when cheking the nandflash.bin done with multibuilder.
Click to expand...
strange.. Opening my freeboot.bin made by jtagtool the 6bl/7bl are grayed out (0)
 
You must log in or register to reply here.