RGH Chipping my XBOX

MopedMan

Full Member
Apr 29, 2014
31
0
Howdy doody everyone!

Since I last posted, I got my hands on a free Xbox (needed RRoD fix). I was planning on chipping my current one (360 Phat Elite, Jasper), but didn't want to loose my online.

So with this new one (it's an old-skool Xenon, and it had the blades dashboard! Until my brother updated it -.-), just piecing together what info I found, I can use the new CR4, and I'd need a JR Programmer or Nand-X to read the Nand? Is that all I'd need to glitch my console?
 

Nintendo

VIP Member
Sep 5, 2014
605
33
Spain
Howdy doody everyone!

Since I last posted, I got my hands on a free Xbox (needed RRoD fix). I was planning on chipping my current one (360 Phat Elite, Jasper), but didn't want to loose my online.

So with this new one (it's an old-skool Xenon, and it had the blades dashboard! Until my brother updated it -.-), just piecing together what info I found, I can use the new CR4, and I'd need a JR Programmer or Nand-X to read the Nand? Is that all I'd need to glitch my console?
If your Xenon is updated you cannot RGH it, you can get a DemoN and install a dual nand to your jasper so you won't loose your Live.
 

MopedMan

Full Member
Apr 29, 2014
31
0
You have to be joking! My brothers dead!!

Then what's needed to install DemoN to a Jasper?
 
Last edited:

Nintendo

VIP Member
Sep 5, 2014
605
33
Spain

Utmad

VIP Member
Aug 15, 2010
3,304
118
Southampton, UK
You have to be joking! My brothers dead!!

Then what's needed to install DemoN to a Jasper?
A CR4 and a Demon, but the Demon has been discontinued so happy hunting!
 
  • Like
Reactions: keil423

MopedMan

Full Member
Apr 29, 2014
31
0
He played Forza Horizon, which installed an update. I'm not at home at the moment so I can't check which one it is.

- - - Updated - - -

A CR4 and a Demon, but the Demon has been discontinued so happy hunting!
Fcuk life -.-
 

nofeloniesyet

VIP Member
Jan 16, 2011
4,830
128
Nowhere
He played Forza Horizon, which installed an update. I'm not at home at the moment so I can't check which one it is.

- - - Updated - - -



Fcuk life -.-
if in usa,check xconsoles,they had some left the other day.
 

MopedMan

Full Member
Apr 29, 2014
31
0
I'm in Ireland so customs would piratically bend me over and have their way with me with charges if I was to buy!

Guess the Xenon is getting sold! Still making a profit :)

If I was to get my hands on another console, what one would you guys recommend to glitch? Preferable a Phat console their cheap over here.
 

Nintendo

VIP Member
Sep 5, 2014
605
33
Spain
If it is a fat, in my oppinion a Falcon is the best, but a preowned Trinity would be better. The only consoles that are problematic are the Xenon and Zephyr, if you get a Zephyr it's possible to get it working but it's hard.

EDIT: you can buy a DemoN from here, its not too far.
 
Last edited:

MopedMan

Full Member
Apr 29, 2014
31
0
If it is a fat, in my oppinion a Falcon is the best, but a preowned Trinity would be better. The only consoles that are problematic are the Xenon and Zephyr, if you get a Zephyr it's possible to get it working but it's hard.

EDIT: you can buy a DemoN from here, its not too far.
Thanks for that! But I think it would work out cheaper for me to buy a pre-owned Falcon! I'd have to buy a DemoN, CR4 and a JR Programmer, which will set me back about €90! If I get a Falcon (would pick up a RRoD for €10), I'd save nearly €40 on the DemoN!
 

Nintendo

VIP Member
Sep 5, 2014
605
33
Spain
Thanks for that! But I think it would work out cheaper for me to buy a pre-owned Falcon! I'd have to buy a DemoN, CR4 and a JR Programmer, which will set me back about €90! If I get a Falcon (would pick up a RRoD for €10), I'd save nearly €40 on the DemoN!
That's fine, maybe you can use the Xenon to practice Soldering, if you have low experience, practicing on another board can save you from killing the Falcon.
 

MopedMan

Full Member
Apr 29, 2014
31
0
I'm fairly handy at soldering! Don the LED swap on all my controllers and such.... I'll just sell the Xenon to help fund the chipping!

So if I get my hands on a Falcon, I just need CR4 and JR Programmer?
 

Nintendo

VIP Member
Sep 5, 2014
605
33
Spain
I'm fairly handy at soldering! Don the LED swap on all my controllers and such.... I'll just sell the Xenon to help fund the chipping!

So if I get my hands on a Falcon, I just need CR4 and JR Programmer?
It depends on the dash, but if it's updated, you will ned the JR Programmer V2 to read/write the nand and the CR4 to glitch it, that's all, if you want to save some money you can buy another chip discontinued like the Rev C or the CR3 lite/pro but if you can wait till October go ahead and buy a JRP and a CR4.

Good luck.
 

MopedMan

Full Member
Apr 29, 2014
31
0
Result!!

Just got my hands on a fully working Falcon with the NXE dashboard!

So, to sum things up, I'd need a CR4 (or a different chip if I wanted), and either a JR Programmer or the NAND-X?
 

Nintendo

VIP Member
Sep 5, 2014
605
33
Spain
Result!!

Just got my hands on a fully working Falcon with the NXE dashboard!

So, to sum things up, I'd need a CR4 (or a different chip if I wanted), and either a JR Programmer or the NAND-X?
Glad you got a new console, what version does it have? Maybe you can perform the RGH1.
 

Nintendo

VIP Member
Sep 5, 2014
605
33
Spain
How do I identify what version it is?? Would i take it if it's a V1 I can RGH1 it??
I think i explained it bad, if you provide us your dashboard version, it's posible that you can perform RGH1.

installed dashboard version dictates what RGH method you need to use.
Yeah, thats it
 
Last edited: