CK3 LITE CK3 Lite Serial to usb

pwnerer

Noob Account
Oct 16, 2011
3
0
Hello

I updated my xbox yesterday via xbox live, and it seems that my drive has now been reset to stock firmware. So i wanna flash it again.
I dont have any of the required hardware except a VIA card.

I am thinking about buying a probe and a CK3 Lite.
I dont have any COM ports, so i was wandering what "Serial to USB cable" i could use to connect the CK3 Lite to my pc?

I looked in this thread but the link didn't work:

http://team-xecuter.com/forums/showthread.php?t=49612&highlight=ck3+lite+serial+usb

//pwnerer
 

dragontm

VIP Member
Oct 25, 2009
898
0
kent uk
i would suggest buying a x360usb, ck3i and probe 3.

These are current used products and will have further support. plus never fails
 

N.E.Modz

VIP Member
Sep 27, 2009
2,285
68
A.K.A daleh43
Hello

I updated my xbox yesterday via xbox live, and it seems that my drive has now been reset to stock firmware. So i wanna flash it again.
I dont have any of the required hardware except a VIA card.

I am thinking about buying a probe and a CK3 Lite.
I dont have any COM ports, so i was wandering what "Serial to USB cable" i could use to connect the CK3 Lite to my pc?

I looked in this thread but the link didn't work:

http://team-xecuter.com/forums/showthread.php?t=49612&highlight=ck3+lite+serial+usb

//pwnerer

you dont need a usb connection anymore, just a ck3 lite/pro, a molex power source, via card & a probe 3.

connect your drive thru sata to your via card (disable drivers) and ck3 to drive with probe 3 connected and probe mpx01

dale;)
 

pwnerer

Noob Account
Oct 16, 2011
3
0
@dragontm
x360usb and ck3i are too expensive

@daleh43
Isn't it nessecary with a connection from the CK3 Lite to the pc?
 

sp4rkst4rt3r

VIP Member
Oct 9, 2010
2,126
0
North-West (UK)
Hello

I updated my xbox yesterday via xbox live, and it seems that my drive has now been reset to stock firmware. So i wanna flash it again.
I dont have any of the required hardware except a VIA card.

I am thinking about buying a probe and a CK3 Lite.
I dont have any COM ports, so i was wandering what "Serial to USB cable" i could use to connect the CK3 Lite to my pc?

I looked in this thread but the link didn't work:

http://team-xecuter.com/forums/showthread.php?t=49612&highlight=ck3+lite+serial+usb

//pwnerer
What drive are you wanting to flash?