CK3i to Nand-X Autobaud error

X

xxxenvy

Junior Member
Sep 4, 2011
20
0
Hi, i've searched all over the forums and google and could not find anything that could help me resolve the Autobaud issue from flashmagic. Im trying to update my Nand-X from v2 (bought a few months ago and never used until now). I followed Ubers guide down to the details. Heres what i've already done.

-Checked the connections of the CK3i to NAnd-X Cable
-Checked if the pins are in the right slots of the cable
-Tried different flashmagic versions
-Tried different COM ports
-Tried different USB slots (and different USB cables)
-Tried different WINDOWS (64 and 32, XP, vista, 7)
-Tried different machines (PC, Laptop)
-Tried Oscillator from 12 to 14.745
-Tried all different Baud Rates
-Double checked the ARMv3.HEX file location
-Uninstalled and reinstalled CK3i drivers
-Powered off and on the Power switch on CK3i
-Pushed the reset button on the NAND-X prior to clicking start on flashmagic.

Im not sure what else i can do to make this work. Im attached my setup just in case anyone wanted to assist.







 
Last edited:
X

xxxenvy

Junior Member
Sep 4, 2011
20
0
xbox360 hacker said:
Don't think think it makes a difference but you could try changing to normal as your using the ck3i in mode_b at the moment.

Edit: Baud rate should be 9600 and why is there no options in step 2 there should be 2 check boxes
Click to expand...
The boxes are not there because it was a different version of flashmagic when i took the screenshot. I can confirm that i checked the one box per the tutorial on the latest version of flashmagic, still failed.


nastybrother24 said:
it could just be your nand x as i can update 2 out of 3 of mine
Click to expand...
Kind of defeats the purpose of updating since the new one i get will be preflashed with v3.. i really hope theres a way around this, i really dont want to spend another 40 dollars buying another nand-x.

Forgot to mention that my Nand-x is not recognized when i plug it into my machine, no connections whatsoever, the red light comes on but no driver installations or prompts and none of that.
 
You must log in or register to reply here.