Got this from another forum. Hope it helps others.
ALL Thanks goes to xMODDEDxSKILLZx from se7ensins for the tutorial. Also Thanks to TX for everything!!!!
PREREQUISITES:
STEPS
Step 1:
extract multibuilder to its own directory
Step 2:
put your nanddump.bin into the "my360" folder
Step 3:
run multibuilder to make proper ecc, (download contains a modified release of multi_builder to support RGH2 ecc file creation) then flash it via jrunner
Step 4:
power on your console via the eject button to boot into xell, write down your cpu key
Step 5:
extract xebuild to its own directory. Copy your nanddump.bin into the "mydata" folder, add your cpu key to the "cpukey.txt" file
step 6:
open a command window in the xebuild directory.
step 7:
run the following command:
xebuild.exe -v -t glitch -d mydata -f 14719 -c falcon -i RGH2falcon //FOR FALCON
xebuild.exe -v -t glitch -d mydata -f 14719 -c jasper -i RGH2jasper //FOR JASPER
xebuild.exe -v -t glitch -d mydata -f 14719 -c zephyr -i RGH2zephyr //FOR ZEPHYR
step 8: after it completes successfully, flash the givin image(should be in the xebuild root
folder called "14719_gg_REVISION.bin) with jrunner
step 9: boot console with the power button and enjoy homebrew awsomeness!
Your welcome!
ALL Thanks goes to xMODDEDxSKILLZx from se7ensins for the tutorial. Also Thanks to TX for everything!!!!
PREREQUISITES:
- Coolrunner configured correctly
- Proper wiring already done
- files
- patience
STEPS
Step 1:
extract multibuilder to its own directory
Step 2:
put your nanddump.bin into the "my360" folder
Step 3:
run multibuilder to make proper ecc, (download contains a modified release of multi_builder to support RGH2 ecc file creation) then flash it via jrunner
Step 4:
power on your console via the eject button to boot into xell, write down your cpu key
Step 5:
extract xebuild to its own directory. Copy your nanddump.bin into the "mydata" folder, add your cpu key to the "cpukey.txt" file
step 6:
open a command window in the xebuild directory.
step 7:
run the following command:
xebuild.exe -v -t glitch -d mydata -f 14719 -c falcon -i RGH2falcon //FOR FALCON
xebuild.exe -v -t glitch -d mydata -f 14719 -c jasper -i RGH2jasper //FOR JASPER
xebuild.exe -v -t glitch -d mydata -f 14719 -c zephyr -i RGH2zephyr //FOR ZEPHYR
step 8: after it completes successfully, flash the givin image(should be in the xebuild root
folder called "14719_gg_REVISION.bin) with jrunner
step 9: boot console with the power button and enjoy homebrew awsomeness!
Your welcome!
Last edited: