GENERAL COMPLETE TEAM XECUTER GUIDE FOR XBOX360 “NO MORE SPOON FEED COLLECTION”

GoRo2010

VIP Member
Jan 30, 2012
183
0
Hi Everyone,

*UPDATE 30/12/2012

I have updated the guide, below is what is included now:

RGH – RESET GLITCH HACK
RGH 'roadmap' for n00bies
Xecuter CoolRunner - Slim Install (QSB) - Trinity
Xecuter CoolRunner - Slim Install (Wires) – Trinity
Xecuter CoolRunner - Slim Install (Wires) - Corona
Xecuter CoolRunner - Phat Install (QSB)
Xecuter CoolRunner - Phat Install (Wires)
CR3 Lite Jumper Settings
Alternate STBY_CLK Install & STBY_CLK Fix – SLIM
Alternative Point For “CPU_RST” - SLIM
Alternative Point For “Post_Out” - SLIM
Alternative Point For “STBY_CLK” – SLIM
Trace Run from STBY_CLK to Southbridge - PHAT HDMI Consoles Only
RGH PHAT Boot / Freeze Problems
FiB3R's Glitch guide
RGH Practice Points

JUNGLE FLASHER – DVD KEY EXTRACT FOR C4EVA’S FIRMWARE
Hitachi GDR-3120L (All Non 79 Versions) - Step-By-Step Guide
Hitachi GDR-3120L (79) - Step-By-Step Guide
Samsung TS-H943 MS25 - Step-By-Step Guide
Samsung TS-H943 MS28 - Step-By-Step Guide
Benq VAD6038 - Step-By-Step Guide
Liteon DG-16D2S 02510C (NEW VERSION) - Step-By-Step Guide (CK3 Probe 3 for DVD Key)
Liteon DG-16D4S 9504 (Slim) - Step-By-Step Guide
Liteon DG-16D4S 0225 (Slim) Unlocked PCB / Pro Kit - Step-By-Step Guide
Liteon DG-16D4S 0401 (Slim) Unlocked PCB / Pro Kit - Step-By-Step Guide

DISASSEMBLING THE XBOX 360
Disassembling the Xbox 360 PHAT
Disassembling the Xbox 360 SLIM

NAND-X
Troubleshooting NAND-x connection problems
NAND-X Solder Points for Slim (Trinity)
NAND-X Installation Guides

DEMON
Demon Phat - Step by Step Installation Guide
Demon Slim - Step by Step Installation Guide

ALL OTHER
XECUTER X360USB PRO HDD HACKER - Step by Step Guide
How To Use Xbox Backup Creator with Liteon DG-16D2S 0800 V3 FW - Step By Step Guide
How To Update and Use Liteon iHAS*24-B DVD to iXtreme Burner Max FW *Official Guide*
Sputnik 360 Switch Install Instructions
DG-16D4S 0225 Epoxy Removal and Replacement - The Easy Way
Corona Post Out Identification & Fix
Xecuter Official Corona Motherboard Identification & Solutions

DGX
DGX J-Runner Guide
Xecuter DGX v1.0S Wire Install Guide

*ADDED
Xecuter DGX FAQ & Troubleshooting Guide *UPDATED: 12/28 10:59PM GMT*
How to Install Avatar & Kinect Data on a JTAG/RGH Console

Download Link

If you have any information that you want to add or want to be added, PM me.

Thanks to all the original posters, Martin C and Ubergeek, thanks for your exceptional tutorials.
 
Last edited:

muchose

VIP Member
Oct 16, 2012
441
33
Eastern Canada
Good job.

Should be easier for noobs having one document for everything, but you know the question ain't gonna stop coming. :cool2:
 

DrunkenNinja

VIP Member
Oct 3, 2011
1,049
88
RGH
You obviously put a lot of effort into that, so Bravo...
 

ApolloBar

Full Member
Nov 3, 2011
42
0
Never gomma work. The forum is already set up with all u meed to know but fair play for your effot


Sent from my GT-N7000 using Tapatalk 2
 
Last edited:
  • Like
Reactions: HoggFace

HoggFace

VIP Member
Aug 8, 2012
733
48
Bristol UK
Never gomma work. The forum is already set up with all u meed to know but fair play for your effot


Sent from my GT-N7000 using Tapatalk 2
How do you know that it won't work? Yes the forum has all the information you need, but to some people having it all in 1 place helps alot, so this will work. Different people find different things easy & hard.

A simple thank you would of been sufficient......just saying.

Thanks alot OP for all your time to put this together mate.
 
  • Like
Reactions: GoRo2010

Martin C

VIP Member
Jan 10, 2004
36,033
0
Scotland, UK
www.team-xecuter.com
It's admirable, OP however as stated there's a saying which goes "You can lead a horse to water, but you can't make it drink".

It's not the content which is the problem, it's the mentality of people who just don't want to read.
 

he-man

VIP Member
Apr 26, 2009
244
0
England
Thanks for all the time and effort put into this guide of all guides...

I'll be keeping a printed copy close by as I find it easier to read.
 

alexander_1333

VIP Member
Jan 10, 2012
982
0
Slovakia
How do you know that it won't work? Yes the forum has all the information you need, but to some people having it all in 1 place helps alot, so this will work. Different people find different things easy & hard.

A simple thank you would of been sufficient......just saying.

Thanks alot OP for all your time to put this together mate.
You Says Thank You to ApolloBar For This Post:
Never gomma work. The forum is already set up with all u meed to know but fair play for your effot


Sent from my GT-N7000 using Tapatalk 2
Then you criticize him.

BTW OP GOOD JOB
 
  • Like
Reactions: GoRo2010

ApolloBar

Full Member
Nov 3, 2011
42
0
Dude, all this info is already here....Martain C hit the nail on the head.............All the admins here have SAID READ THE STICKYS......READ THE ROAD MAP... READ IT ALL...................
 

ApolloBar

Full Member
Nov 3, 2011
42
0
Sorry if I seem a bit harsh, I really am, but if you hit the TX Forums and scroll down, all your prayers will be answered.

---------- Post added at 06:14 ---------- Previous post was at 06:13 ----------

Thats always been the case, READ...READ...and read AGAIN
 
  • Like
Reactions: talby71

ApolloBar

Full Member
Nov 3, 2011
42
0
For example... Uber's sig said ..........................ALWAYS REVERT.., next thing someone says, if I got LT V.VV do I need to revert to stock?
 

HoggFace

VIP Member
Aug 8, 2012
733
48
Bristol UK
Sorry if I seem a bit harsh, I really am, but if you hit the TX Forums and scroll down, all your prayers will be answered.

---------- Post added at 06:14 ---------- Previous post was at 06:13 ----------

Thats always been the case, READ...READ...and read AGAIN
Yes your right people should read the stickies and use the search button. But if everything is in 1 place for the lazies that don't search then the people who do dint have to read page after page of useless posts. So we're all winners in some way with this. Lol
 

ApolloBar

Full Member
Nov 3, 2011
42
0
No mate, I pointed out first, then said Good Job

---------- Post added at 06:27 ---------- Previous post was at 06:22 ----------

AHHHHHHHHHHHHHHHHHH..lol, it is all in one place!!! :)
 

GoRo2010

VIP Member
Jan 30, 2012
183
0
I will try to keep this guide as up-to-date as possible, any suggestions or feedback is always more than welcome.