LITEON 93450 computer freezing

juanbrnt

VIP Member
Apr 20, 2011
625
33
long island new york
i flash other drives in the past with no problem but for some reason my computer freeze with this lite on 93450. the drive is dead customer kill the firmware. so i rgh the console to get the dvd key ,well i got the dvd key n im trying to do the manual spoofing but jungle flasher freeze can any one help me here

i running window xp and sata chipset via 6421
 
Last edited:

Menethoran

VIP Member
Sep 1, 2012
340
0
Reading, PA
i flash other drives in the past with no problem but for some reason my computer freeze with this lite on 93450. the drive is dead customer kill the firmware. so i rgh the console to get the dvd key ,well i got the dvd key n im trying to do the manual spoofing but jungle flasher freeze can any one help me here

i running window xp and sata chipset via 6421
Try booting the computer with the drive attached and powered on...
 
Last edited:

sherlock

Staff member
Troll Eating Dogs
time for you to get either the X360USB PRO or the even better X360USB PRO V2, no more lite-on freeze.;)

I know you said it's worked before with your setup but I used the via card setup and still got a frozen pc but never with my X360USB Pro.
 
Last edited:
  • Like
Reactions: juanbrnt

juanbrnt

VIP Member
Apr 20, 2011
625
33
long island new york
time for you to get either the X360USB PRO or the even better X360USB PRO V2, no more lite-on freeze.;)

I know you said it's worked before with your setup but I used the via card setup and still got a frozen pc but never with my X360USB Pro.

thank you yeah i read about it over the internet but i also read something using l-o-erase and dosflash
 

n0syst3m

VIP Member
Sep 17, 2011
204
0
North East ;)
Via method not supported for along time. Get a x360usb and come back.

Alot of posts needing help, but they dont have any xecuter products?

At the top says "Product Support Forums"
 
Last edited:
  • Like
Reactions: juanbrnt
Aug 25, 2010
2,160
0
Cornwall England
Via method not supported for along time. Get a x360usb and come back.

Alot of posts needing help, but they dont have any xecuter products?

At the top says "Product Support Forums"
pretty sure Via is still supported here.

have you disabled the driver in device manager so you get the yellow ! next to it?

If I remember you must delete a certain driver and then enable it again. that should then stop any freezing issues
 

n0syst3m

VIP Member
Sep 17, 2011
204
0
North East ;)
But via was dropped because of issues with lie-on freezing. Thats why the jf tutorial was updated. Granted the original method might work, i think if you cant get a x360usb and do it properly and you want to rely on old methods then of course you will have problems. Correct me if i'm wrong.
 

Spudnutz

VIP Member
Mar 25, 2010
74
0
Las Vegas, NV.
Ensure these are the drivers used: Windows V-RAID V530C - http://xrl.us/befb65
Ensure the drivers are removed per the JF tut
Reboot your PC and confirm in your dev manager that the device says 6421 and is yellow!
Ensure this is the correct port used on the card: http://www.flashed.me.uk/pics/viaport.jpg

After that is complete, the card is ready for use.

Now if the drive does not eject under power, this means two things could be the cause:
1. The drive has been erased - which means their is no fw currently on the drive and CAN BE recovered.
2. The drive was fried due to someone who had reversed the power, probed the wrong point, etc. (this of course is not a good thing)

Ok considering it could be erased its a simple method of recovery.


simply:
click intro - yes/powercycle (12v) after you see the first dot.

other trick is to:
power drive off/click intro - yes/power drive on after you see the first dot.

(some think its a "have to powercycle quickly" thing, THAT IS A MYTH!)


0x72 is the goal but 0x80 is a good sign
0x80 reflects that your drive is trying to recover.

btw: of course a sure proof way to recover the drive is to simply mra the drive.
 
Last edited:
  • Like
Reactions: juanbrnt

juanbrnt

VIP Member
Apr 20, 2011
625
33
long island new york
Ensure these are the drivers used: Windows V-RAID V530C - http://xrl.us/befb65
Ensure the drivers are removed per the JF tut
Reboot your PC and confirm in your dev manager that the device says 6421 and is yellow!
Ensure this is the correct port used on the card: http://www.flashed.me.uk/pics/viaport.jpg

After that is complete, the card is ready for use.

Now if the drive does not eject under power, this means two things could be the cause:
1. The drive has been erased - which means their is no fw currently on the drive and CAN BE recovered.
2. The drive was fried due to someone who had reversed the power, probed the wrong point, etc. (this of course is not a good thing)

Ok considering it could be erased its a simple method of recovery.


simply:
click intro - yes/powercycle (12v) after you see the first dot.

other trick is to:
power drive off/click intro - yes/power drive on after you see the first dot.

(some think its a "have to powercycle quickly" thing, THAT IS A MYTH!)


0x72 is the goal but 0x80 is a good sign
0x80 reflects that your drive is trying to recover.

btw: of course a sure proof way to recover the drive is to simply mra the drive.

ok i try this and it work but when i try to flash the firmware again stop and freeze:(
 

Spudnutz

VIP Member
Mar 25, 2010
74
0
Las Vegas, NV.
Confirming your setup
example:
Reboot your PC and confirm in your dev manager that the device says 6421 and is yellow!

Well is it??

You know what code 10 means?
code 39?

little things like that help :facepalm:

you stated the drive is a 93xx
pending your dash version, it might be or not!

All phat liteon's become 0251's after 13xxx dash update!

simply saying "oh poop it didn't work" is like trying to play a trivia game w/o the questions

TOTAL GUESS WORK!

What all posts should include is the JF LOG.
accurate details help!!


Just a suggestion :rolleyes2:
 
Last edited:
  • Like
Reactions: juanbrnt

juanbrnt

VIP Member
Apr 20, 2011
625
33
long island new york
Confirming your setup
example:
Reboot your PC and confirm in your dev manager that the device says 6421 and is yellow!

Well is it??

You know what code 10 means?
code 39?

little things like that help :facepalm:

you stated the drive is a 93xx
pending your dash version, it might be or not!

All phat liteon's become 0251's after 13xxx dash update!

simply saying "oh poop it didn't work" is like trying to play a trivia game w/o the questions

TOTAL GUESS WORK!

What all posts should include is the JF LOG.
accurate details help!!


Just a suggestion :rolleyes2:
After couple rebbots it work thanks brother
 

Smouken

Full Member
Apr 16, 2011
25
0
Czech republik
I had the same problem. It always froze up when flash
Do not be in JungleFlasher / firmware all the firmware files.
Have there's only one that you need to do the flash drive.
It helped me.
now good. I do not have no problem freezing pc.
see you later
 

Antalpromille

VIP Member
Aug 4, 2011
3,165
0
Borås, sweden
I had the freezing problem when i used my onboard sata, but it sorted itself after a driver update. It now takes all phat drives without a problem. But you should just get the c360usb pro v1 or v2, i will solve all your xbox360 flash-related problems.