I have the option to autostart x3configlive disabled, but when I turn on my xbox it still boots to x3 configlive. Why would this happen? Thank you for your time and attention.
configlive ?
- Thread starter ganjaking
- Start date
have you installed a dash yet?
have you told configlive where to boot the dashes?
have you set the boot priority of the dashes?
have you told configlive where to boot the dashes?
have you set the boot priority of the dashes?
I have the oposit problem...
I only get the Flashbios 3.0.3 screen with
Hdd: 200gb Maxtor
DVD: Thomson- DVD
enable network Flashing
Load bios from hdd
Load bios from Disk
Unlock HDD
Lock HDD
Doesn´t care if i press down any keys, gets the same anyway
V1.0 With xapt3r and X3.....
I only get the Flashbios 3.0.3 screen with
Hdd: 200gb Maxtor
DVD: Thomson- DVD
enable network Flashing
Load bios from hdd
Load bios from Disk
Unlock HDD
Lock HDD
Doesn´t care if i press down any keys, gets the same anyway
V1.0 With xapt3r and X3.....
I have the oposit problem...
I only get the Flashbios 3.0.3 screen with
Hdd: 200gb Maxtor
DVD: Thomson- DVD
enable network Flashing
Load bios from hdd
Load bios from Disk
Unlock HDD
Lock HDD
Doesn´t care if i press down any keys, gets the same anyway
V1.0 With xapt3r and X3.....
I only get the Flashbios 3.0.3 screen with
Hdd: 200gb Maxtor
DVD: Thomson- DVD
enable network Flashing
Load bios from hdd
Load bios from Disk
Unlock HDD
Lock HDD
Doesn´t care if i press down any keys, gets the same anyway
V1.0 With xapt3r and X3.....
If I understand you correctly, you installed the chip and flashed it with FlashBIOS. You then turn it on and keep getting the FlashBIOS screen?dunderK said:
Congrats, your X3 is installed and working correctly.
i had that happen with mine. could you tell me what to do afterwards? if its not too much troublemrwill said:
What? You flashed it with flashbios and it kept loading to flashbios??
YAY GODS..
I'm off to bed.
(try flashing it with the correct bios)
YAY GODS..
I'm off to bed.
(try flashing it with the correct bios)
But nothing hapens when i try to bot to ConfigLive (white when booting)
And it refuses to bot from Super-Disc or any other disc..
I´m starting to get frustrated
And it refuses to bot from Super-Disc or any other disc..
I´m starting to get frustrated
From the FlashBIOS Tutorial that is on the front page of the site: http://www.teamxecuter.com/flashbios/
Please read it fully, as I have seen this question numerous times today. I should also point everyone to this sticky right above this thread: http://www.teamxecuter.com/index.php?name=Forums&file=viewtopic&t=21054
Please read it fully, as I have seen this question numerous times today. I should also point everyone to this sticky right above this thread: http://www.teamxecuter.com/index.php?name=Forums&file=viewtopic&t=21054
Are you able to use an alternative network method? It’s either that or you’ll need to experiment with different media until you find one that your DVD ROM will read. Also be sure to use your standard Xbox controller (don’t use any others while doing bios flashing) and A/V cables.dunderK said:
im ysing the default controller that went with the xbox.
i´m at work so i cant connect anything to the network. (my son wants it when i get home this morning(sweden))
i´ll try to download another disc when i get home. But it wierd that i cant get into configlive i think. Not even when i put back the original HDD. But it boots ok with mod swithed off then....
i´m at work so i cant connect anything to the network. (my son wants it when i get home this morning(sweden))
i´ll try to download another disc when i get home. But it wierd that i cant get into configlive i think. Not even when i put back the original HDD. But it boots ok with mod swithed off then....
Sorry for beeing such a n00b Idiot....
Couldn´t flush it with the xapt3r, didn´t sit tight enough.
Solderd it and now it works like a charm!!!
Couldn´t flush it with the xapt3r, didn´t sit tight enough.
Solderd it and now it works like a charm!!!
Iprep v10.7 & 1.61 liton (7series)
Hey guyz ,,, need help.
I have win 7 x64bit .. so not able to use JF. I have been sucessfully flashing with Iprep for all these years. Now i was trying to flash my 7 series Liteon with 1.61 and when i load f/w it says NOT VALID ..
have the new definations been out for iprep yet ??
If not then am i suppose to wit /// or is there any otherway 2 flash.
thnx
Hey guyz ,,, need help.
I have win 7 x64bit .. so not able to use JF. I have been sucessfully flashing with Iprep for all these years. Now i was trying to flash my 7 series Liteon with 1.61 and when i load f/w it says NOT VALID ..
have the new definations been out for iprep yet ??
If not then am i suppose to wit /// or is there any otherway 2 flash.
thnx
Re: Iprep v10.7 & 1.61 liton (7series)
Hi - I had the same problem, you need to get an update ixdef.xml file.
In the end I had to do a google search for it however it should be in xbins.
If still have issues ill try and locate and send over to you.
Cheers
Hi - I had the same problem, you need to get an update ixdef.xml file.
In the end I had to do a google search for it however it should be in xbins.
If still have issues ill try and locate and send over to you.
Cheers
Re: Iprep v10.7 & 1.61 liton (7series)
xbins aint even updated with 1.61 for 7 series. Forget about the ixdef file.
AM trying myhands on this Dosflash thing. WIll update once it is done !!
xbins aint even updated with 1.61 for 7 series. Forget about the ixdef file.
AM trying myhands on this Dosflash thing. WIll update once it is done !!
Re: Iprep v10.7 & 1.61 liton (7series)
Create the file in JF then copy it to the iPrep USB you've created. Use "flit 1234567 12345 w" (notice the lowercase w) to write your CFW to the drive. You don't need definitions to do this assuming you can at least LOAD JF on your system.
Create the file in JF then copy it to the iPrep USB you've created. Use "flit 1234567 12345 w" (notice the lowercase w) to write your CFW to the drive. You don't need definitions to do this assuming you can at least LOAD JF on your system.
Re: Iprep v10.7 & 1.61 liton (7series)
yes , i can start JF in my system .... let me try this out
thnx
yes , i can start JF in my system .... let me try this out
thnx