LITEON 74850 CONFUSED AND STUCK

Andez1986

VIP Member
Apr 13, 2011
229
0
South Wales - UK
hi,
this may sound stupid but I have successfully flashed many drives now, but for some reason I'm having trouble doing my own, I have a 74850 lite-on, which after flashing and updating changed to the 02510 status, I flashed it but I cant remember the firmware I put on it, I know it wasn't LT+1.9 its the one before that, I've been playing my backup of tiger woods 12 so they dashboard was 13146 if I'm not mistaken, I just tried to update via USB, I downloaded the new update from the microsoft website, 13599 dashboard, I put it in my xbox, turned it on, I clicked on update now, it failed, dont know why, my drive was updated to the 02510 from the 74850, so I had a look on some other threads and saw, flash back to stock, update again, tried that, so I now have a 74850 drive with the 13146 dashboard, I am having a bit of trouble getting my head around this, so... I cant put LT+1.9 on as my drive cant update to the 02510 status?????:confused::confused::confused:
how do I get it to the 02510 status if i cant update via USB and I'm not on XBL
WOULD I NEED TO PUT IN A SPECIFIC GAME? IF SO WHICH ONE?
any ideas anyone:eek:
 
Last edited:

xtremepcs

VIP Member
Jun 29, 2011
205
23
My Man Cave
you need to flash to 02510 fw, if the usb update fails you can always plug in Ethernet cable and go to recover gamer tag then update to the newest dash
 

Andez1986

VIP Member
Apr 13, 2011
229
0
South Wales - UK
right, just flashed to stock which is the 74850, put dashboard update 13599 on USB, clicked on update and it said error, with a long error code

now my head is all over the shop :D

dashboard on my xbox says 13146
 
Last edited:

Andez1986

VIP Member
Apr 13, 2011
229
0
South Wales - UK
from the microsoft website? as that is where i had it from to start with:confused:

its called systemupdate13599_usb

sorry misunderstood
i'll look now for it
 
Last edited:

x360ccm

BANNED
Jan 18, 2011
3,616
0
south coast UK
load your dummy as source,you will get a pop up askin do you wish to auto lt plus,click no.
then click open target firmware and load the orig-02510C-1c000 as target,then click the spoof source to target tab,once you done that.
then click on the write tab.
then finish the update.

you will find the orig-02510C-1c000 in the liteon post 13141 folder in the firmware pack.
 

Andez1986

VIP Member
Apr 13, 2011
229
0
South Wales - UK
ok, i just looked in the 1.91 folder and there's stock firmware with that called 02510C-1c000, i tried to spoof to that and it said serial is bad or something, here's my log

JungleFlasher 0.1.87 Beta (277)
Session Started Wed Sep 28 22:05:45 2011
This is a Wow 64 process running on 2 x 64 bit CPUs
X360USB PRO detected, Version 0.18
Found 1 I/O Ports.
Found 1 Com Ports.
Found 6 windows drives A: C: D: E: F: I:
Found 1 CD/DVD drives D:
Drive is Lite-On..
Key found in KeyDB at record (4 - LiteOn_Post_13141)
Key is: 0B137C192E8F4E170491A83799CF2DF5
Key has been tested and verified, thanks C4eva !
Sending Vendor Intro to port 0x0000
Status 0x51
Re-sending Vendor Intro:
................
Serial flash found with Status 0x52
Extracted drive key passed Verification !
key returned: 0B137C192E8F4E170491A83799CF2DF5
0000: 05 80 00 32 5B 00 00 00 - 50 4C 44 53 20 20 20 20 ...2[...PLDS
0010: 44 47 2D 31 36 44 32 53 - 20 20 20 20 20 20 20 20 DG-16D2S
0020: 37 34 38 35 30 43 41 30 - 41 31 44 36 30 38 43 47 74850CA0A1D608CG
0030: 38 31 30 39 30 38 30 30 - 4D 39 4E 20 20 20 00 00 81090800M9N ..
0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0000: 05 80 00 32 5B 00 00 00 - 50 4C 44 53 20 20 20 20 ...2[...PLDS
0010: 44 47 2D 31 36 44 32 53 - 20 20 20 20 20 20 20 20 DG-16D2S
0020: 37 34 39 31 30 43 20 20 - 00 00 00 00 00 00 00 00 74910C ........
0030: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0000: C0 85 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0010: 00 00 00 00 44 36 30 38 - 43 47 38 31 30 39 30 38 ....D608CG810908
0020: 30 30 4D 39 4E 20 20 20 - 00 00 00 00 00 00 34 37 00M9N ......47
0030: 35 38 43 30 20 20 4C 50 - 53 44 20 20 20 20 47 44 58C0 LPSD GD
0040: 31 2D 44 36 53 32 20 20 - 20 20 20 20 20 20 20 20 1-D6S2
0050: 20 20 20 20 20 20 20 20 - 20 20 20 20 20 20 00 00 ..
0060: 00 00 00 0B 00 00 00 04 - 00 02 06 00 00 00 00 00 ................
0070: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0080: 03 00 78 00 78 00 E3 00 - 78 00 00 00 00 00 00 00 ..x.x...x.......
0090: 00 00 00 00 00 00 00 00 - 02 02 00 00 68 00 00 00 ............h...
00A0: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00B0: 20 20 00 00 ..
0000: 44 36 30 38 43 47 38 31 - 30 39 30 38 30 30 4D 39 D608CG81090800M9
0010: 4E 20 20 20 FF FF FF FF - 38 42 31 33 30 31 31 30 N ....8B130110
0020: 31 37 41 35 31 34 58 58 - 41 30 FF FF 53 34 50 38 17A514XXA0..S4P8
0030: 32 31 37 30 30 30 30 30 - 30 32 30 39 33 32 00 00 21700000020932..
0040: FF FF FF FF FF FF FF FF - FF FF FF FF 41 31 FF FF ............A1..

Dummy.bin file saved to Dummy.bin
Loading firmware from buffer
Inquiry string found
Identify string found
Drive key @ 0xA030 0B137C192E8F4E170491A83799CF2DF5
Firmware Osig: [PLDS DG-16D2S 7485]
Firmware is: PhatKey Extract
Key database updated
Loading firmware file I:\New Flashing Firmware\LT 1.91\Stock firmware\LiteOn (Phat)\LiteOn_Post_13141\orig-02510C-1c000.bin
MD5 hash: e7e0f802769fd80329784ca4b512f1a9
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS DG-16D2S 0251]
Firmware is: Stock
Spoofing Target
DVD Key copied to target
Target is LT - ID strings not copied to Target
Target rev is LT 02510C, serial info not copied

---------- Post added at 22:13 ---------- Previous post was at 22:09 ----------

just got 1.92 pack

---------- Post added at 22:21 ---------- Previous post was at 22:13 ----------

Why does is say on the bottom

SERIAL INFO NOT COPIED?

is this important?

ive just written stock 02510c firmware to my drive, so now i flash it again to lt+1.91