X360USB PRO Connect / Disconnect problems in jf

T

TheBigT

Full Member
Mar 9, 2011
25
0
Kent, UK
Hi

Getting quite cross now, particularly having ruined two drives..... Grrrr

I have previously used my friends x360usb with no problems, so thought I would buy my own. 12 week wait till it was finally here.

The firmware is v0.18 (latest). Drivers are installed correctly.

When in jungleflasher, it keeps connecting and disconnecting continuously. Including halfway through flashing drives.

What can I do, or do you think it is a faulty unit.

Tony:mad2::mad2::mad2:
 
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
blakey8 said:
Also, try using the AUX power cable that was supplied with the device.
Click to expand...
^^^ This


I have the same issue on my laptop because the USB isn't giving enough power. Use the Aux power cable and you'll be fine. There is nothing wrong with the X360USB :)

More interestingly, how have you ruined two drives? What drives are they?
 
T

TheBigT

Full Member
Mar 9, 2011
25
0
Kent, UK
Have tried 3 PCs now, all of which worked fine with my friends x360 usb.

The drives ruined (Both BENQ): Got to Erase firmware, then halfway through the writing stage..... Guess what..... Drive Disconected - Drive Connected - Drive Disconnected - Drive Connected and so on....

I have tried with both the USB and AUX powers....

I have changed the USB lead for another.

Cant think of much else to do. How would I know if it is a hardware fault with the x360 USB unit.

Thanks to all so far....
 
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
TheBigT said:
Have tried 3 PCs now, all of which worked fine with my friends x360 usb.

The drives ruined (Both BENQ): Got to Erase firmware, then halfway through the writing stage..... Guess what..... Drive Disconected - Drive Connected - Drive Disconnected - Drive Connected and so on....

I have tried with both the USB and AUX powers....

I have changed the USB lead for another.

Cant think of much else to do. How would I know if it is a hardware fault with the x360 USB unit.

Thanks to all so far....
Click to expand...
Losing power halfway through a flash does NOT ruin a Benq drive. You just need to vendor intro it again to get access to the SPI for reading/writing.

It's a shame that so many people actually think you can brick a benq/lite-on through a failed write.
 
T

TheBigT

Full Member
Mar 9, 2011
25
0
Kent, UK
Hi

The drive is a BenQ, and I am using windows 7 64bit.

JF listing is below:



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

JungleFlasher 0.1.90 Beta (292)

Session Started Wed Nov 30 18:20:24 2011



This is a Wow 64 process running on 2 x 64 bit CPUs

X360USB PRO detected, Version 0.18



Found 1 I/O Ports.

Found 0 Com Ports.

Found 6 windows drives C: D: E: F: G: H:

Found 2 CD/DVD drives E: F:



Drive is Benq..

Drive is Benq..

Drive is Benq..



Sending Magic Keys to Drive on port 0x0000

.........XECUTER X360USB PRO removed.



XECUTER X360USB PRO attached.



XECUTER X360USB PRO removed.



XECUTER X360USB PRO attached.



XECUTER X360USB PRO removed.



XECUTER X360USB PRO attached.



This is really annoying, I havent even touched this drive, I just need the key.

Any help would be appreciated, also I need to know if i should be asking Team Xecuter for a new x360usb pro. it is brand new.

T

---------- Post added at 18:37 ---------- Previous post was at 18:37 ----------

Also, both the usb power supply and usb data leads are attached to x360usb pro
 
You must log in or register to reply here.