console wont boot..

[Newborn]

had my RGH for a little while, had no issues, this one has made me mad, was on GTA 5 messing with a mod menu, tried to spawn a car.. but it would cause everything to lag, when I closed the menu it went away, when I opened the menu it came back, so only way to fix was to restart, so I did.. but this time it did not boot, its a black screen, wont even boot into xell, so I cant re flash, but there's a red light, then green pulsating everything 5 seconds, so.. it's trying to boot, I really want to avoid sending it back to be fixed, so does anyone else have any solutions?

I have tried it without hard drive.. it wont boot, tried it with USB, it wont boot, just stays black flashing green every 5 seconds trying to glitch..... i didn't touch anything for this to happen.

my console is a trinity RGH

 

[Nintendo]

had my RGH for a little while, had no issues, this one has made me mad, was on GTA 5 messing with a mod menu, tried to spawn a car.. but it would cause everything to lag, when I closed the menu it went away, when I opened the menu it came back, so only way to fix was to restart, so I did.. but this time it did not boot, its a black screen, wont even boot into xell, so I cant re flash, but there's a red light, then green pulsating everything 5 seconds, so.. it's trying to boot, I really want to avoid sending it back to be fixed, so does anyone else have any solutions?

I have tried it without hard drive.. it wont boot, tried it with USB, it wont boot, just stays black flashing green every 5 seconds trying to glitch..... i didn't touch anything for this to happen.

my console is a trinity RGH

Usually I don't run code on my own xbox if I don't fully trust it. I'd try to flash retail nand and see if it boots

 

[Newborn]

Usually I don't run code on my own xbox if I don't fully trust it. I'd try to flash retail nand and see if it boots

but I said it wont even boot in to xell, if I did problem solved.. but not that easy.. it seems like something else is stopping it.

 

[Newborn]

I know some RGH you can flash yourself without solder... it just plugs in, do you know how I can tell? I'd give it bash opening it, plenty of guides think mine is CR3 PRO

 

[Nintendo]

I know some RGH you can flash yourself without solder... it just plugs in, do you know how I can tell? I'd give it bash opening it, plenty of guides think mine is CR3 PRO

Just open the console and take some pics, I upload them to tinypic, take pics of the top of the board

 

[Newborn]

Just open the console and take some pics, I upload them to tinypic, take pics of the top of the board

that's the thing, I have never opened, as I bought it, but if I could reflash it, with usb? then it probably could do it, but I want to make sure I can before i try open it lol

 

[GeekHeat]

Does this trinity have 4gb internal memory

 

[Newborn]

Does this trinity have 4gb internal memory

I think it does yeah

 

[Nintendo]

I think it does yeah

Did you bought it as a premodded system? Does it have any warranty? (Warranty from the installer). If not, you can open it or send it to someone to flash it for you.

 

[Newborn]

Did you bought it as a premodded system? Does it have any warranty? (Warranty from the installer). If not, you can open it or send it to someone to flash it for you.

talking to the seller now, he says try leave it for awhile trying to boot to XELL ( not sure if leaving long wil lhelp) just tried a 30 minute normal boot with no success. so not feeling hopeful about the Xell boot, but I was trying to avoid sending it back if possible.

I could flash my self it doesn't require.. anything that needs to be soldered.. how do I know if my board has flash nands with just a cable?

 

[Nintendo]

talking to the seller now, he says try leave it for awhile trying to boot to XELL ( not sure if leaving long wil lhelp) just tried a 30 minute normal boot with no success. so not feeling hopefully about the Xell boot, but I was trying to avoid sending it back if possible.

I could flash my self it it doesn't require.. anything that needs to be soldered.. how do I know if my board has flash nands with just a cable?

Look, to flash the nand without soldering anything, your xbox should have a QSB installed. It looks like this

Credits of the image: Se7ensins.com

But even if you have the QSB installed, you'll need to buy a JR-Programmer, something really useful. When did you bought the console?

 

[Newborn]

Look, to flash the nand without soldering anything, your xbox should have a QSB installed. It looks like this

Credits of the image: Se7ensins.com

But even if you have the QSB installed, you'll need to buy a JR-Programmer, something really useful. When did you bought the console?

ah dam.... ah well, looks like its screwed, then, few mouths ago.

 

[Nintendo]

ah dam.... ah well, looks like its screwed, then, few mouths ago.

Maybe the modchip is failing. I don't know, but if it doesn't have warranty go ahead and open it, or look someone nearby who can flash the nand.

 

[Newborn]

Maybe the modchip is failing. I don't know, but if it doesn't have warranty go ahead and open it, or look someone nearby who can flash the nand.

dont have JR programmer though

 

[Nintendo]

dont have JR programmer though

Then find someone who has the equipment and the skill to be able to do it, it won't be very expensive just to flash a nand...

 

[Newborn]

Then find someone who has the equipment and the skill to be able to do it, it won't be very expensive just to flash a nand...

yeah, but it makes no logical sense, it has a green light.. so its trying to boot, and it was working fine till that.

 

[Nintendo]

yeah, but it makes no logical sense, it has a green light.. so its trying to boot, and it was working fine till that.

If you can't flash retail nand to make sure that the hardware isn't damaged, there is no way to tell what is wrong. If I don't have the console in front of me or I don't have any pic is impossible. If it keeps on failing, just open it, no harm can be done by just opening it (Just be careful with the RF board and its fle cable when removing the top cover lol)

Did the installer gave you a copy of the nand or CPU Key?

 

[Newborn]

If you can't flash retail nand to make sure that the hardware isn't damaged, there is no way to tell what is wrong. If I don't have the console in front of me or I don't have any pic is impossible. If it keeps on failing, just open it, no harm can be done by just opening it (Just be careful with the RF board and its fle cable when removing the top cover lol)

Did the installer gave you a copy of the nand or CPU Key?

yeah I have nand and cpukey ;p

 

[Nintendo]

yeah I have nand and cpukey ;p

If you can and want, open the console, take pics and upload them, or just post a Request to get it fixed, there isn't a magic way to flash the nand without some hardware. I can't give you any other advice.

 

[Newborn]

If you can and want, open the console, take pics and upload them, or just post a Request to get it fixed, there isn't a magic way to flash the nand without some hardware. I can't give you any other advice.

but since its flashing green, nand is fine, must be something else stopping it.; but probably have to send it to be fixed,