so wait Jr programmer doesn't get installed into the console, so when its closed you connect JR PROGRAMMER OUTSIDE to the adapter? is that correct? then USB to pc? from the jr programmer.? that's why I was lost because I thought it was... I thought it had to be solderd to the nand to work, I guess that's what the adapter is for.Because the JRp is not inside the console, look at my "diagram", JRP is not inside of the console
Does this clarify it? It's not the same install but think that the Adapter is there.EDIT:
Yeah, what you just posted is correct.
console wont boot..
- Thread starter Newborn
- Start date
Yes, you got it. But as I said before, installing a Demon would do the same for a lower price
and I am guessing it doesn't come with the USB? also the wire connected to the CR4,, guessing you wont see that big wire its all inside?
You need your own USB cable, you won't even notice that the Ext Adapter is installed, just if you look at the back of the console.
With a Demon You'll see this.
The USB cable goes to your PC.
what kind of usb? any mini usb or micro usb?You need your own USB cable, you won't even notice that the Ext Adapter is installed, just if you look at the back of the console.
With a Demon You'll see this.
The USB cable goes to your PC.
but thats a demon not the adapter but same thing i guess ;p
Last edited:
I use one that came with a Tritton headset I bought for Xbox or one that came with a camera. If it's long, it may not work because the signal is lost.
well I have a few USB lying around think one came from my phone... but I think its a micro usb sure ill have one laying around, thanks for all your help
You are welcome, just press that "Thanks" button at the bottom left of my post. If you need anything else just post it here.well I have a few USB lying around think one came from my phone... but I think its a micro usb sure ill have one laying around, thanks for all your help
BTW: before sending it, I'll just let you know that we are not sure if just reflashing the nand would work, I'd better first get it working and then install all that good stuff.
Last edited:
well.. it's a fresh install.. of everything and i am sure reflashing he nand would work but what do I know... I have already Paid for the job, and parts, and the already set it up to be picked up
I have not seen the board myself, so I don't really know what is the issue. If it's not the nand, it might be the CR or the XCGPU (The CPU or GPU). But your console is in good hands now, BL4K3Y will sort it out.
BTW: Have you tried to boot XeLL again?
Last edited:
did try once yesterday with no success.. but its already packed and waiting for pick up
ask him to take pictures of the board if you want as you said you where interested, I have no issue with him sharing them with you .Maybe the nand is fine but the chip just stopped working becuse is one of those Fake rev C, We'll see.