I Plugged in Xbox power and noticed Coolrunner power was still plugged in.. now no Power .. is this Xbox Toast?
cool-runner Ground touched 3.v3
- Thread starter Crazywhitie
- Start date
CR was hooked up.. I plugged in Power plug.. Power supply went Red.. I unplugged looked around and noticed the Ground came out and was touching the 3.3v on the CR.. I replaced on Ground Pad.. Plugged back in power No Short this time. but No Power... the Guy Before me mesed up the STBY_CLK pad.. but was working
Does the PSU still go red?, if it doesn't the CR is toast and the only way to check your MB is replace the CR or take it out and flash back to stock
no just stayed Orange ,,, ok will flash back, I hooked up Coolrunner to a different Jasper green light was flashing but never booted to xell.. k I'll test other console
Last edited:
I'm only getting Looking for USB Interface Device .. can not continue.... does this mean the nand needs to be shorted?
Are you getting this on your console with stock nand, no CR install
Edit: I think you have shorted out the Nand, try pulling the power from console for a minute and then try reading the nand, I'm kind of digging on this one
Edit: I think you have shorted out the Nand, try pulling the power from console for a minute and then try reading the nand, I'm kind of digging on this one
Last edited:
Maybe Ubergeek or Martin C will chime in on this one later, they may know what got damaged
EDIT: Or blakey8
EDIT: Or blakey8
Last edited:
BL4K3Y
VIP Member
dam I hate shorting out these nands.. takes me forever .. I did notice the Coolrunner Power LED still lights up when Plugged in to Power..
Ok here's what I did... I tried to short nand .. didn't Work.. I hooked up the 3.3v to the nand. Didn't Work.. I turn up the 3.3v to 5v still didn't work... Does any one know someone in the States that has a better chance of fixing this?