Martin C
VIP Member
Coolrunner 2 Nand-X Cable Issue
- Thread starter danielh2k11
- Start date
No, Im waiting for my new soldering iron to get delivered as my 'good one' unfortunately blew up earlier. I just thought I could get the Coolrunner programming out of the way now.
Martin C
VIP Member
So it's possible your NAND-x isn't programmed correctly. Try it again, following the instructions.
I'm not saying it'll fix it, but it's worth a shot.
I'm not saying it'll fix it, but it's worth a shot.
Just updated it again now
http://i.imgur.com/M8pTb.jpg
---------- Post added at 15:35 ---------- Previous post was at 15:33 ----------
Nothing, still the same original error... GRRR
danielh2k11, do you have a spare multi-meter laying around that you could check that your yellow wire from the back of the plug (since we can see metal sticking out) touching the metal between the back of the yellow and the contacts on the coolrunner itself.
If you could, check it just to make sure the wire has proper connection from the cable to the coolrunner.
If you could, check it just to make sure the wire has proper connection from the cable to the coolrunner.
I will have a look if I have one, thanks for that. I have just send a link to this thread to MrModchips and a brief description of the situation so hopefully all goes well.
have you flipped the end that goes into the coolrunner?
the smooth side goes on top. if its flipped over it wont work.
the smooth side goes on top. if its flipped over it wont work.