RGH Coolrunner/CR3 lite programming

R

reaper57

Junior Member
Dec 5, 2014
22
0
Hi, this is my first post here so if I break a rule or not give enough information, pls tell me so that I can correct it! :)
So anyway, I bought this RRoD 360 that has a cr3 lite in it and I also found a coolrunner for cheap at a local online store. My problem is that I don't have a nand-x, nor do I have a jr programmer so I have to program the coolrunner and the cr3 lite with lpt. This is my second time attempting a RGH so I have an lpt cable made by following this diagram: http://s72.photobucket.com/user/ViperXL2/media/lptjtag.png.html . The first time I didn't use a tx product (I used a ****** rgh board). My question is can I use this cable to program the coolrunner and the cr3 lite or do I have to make one by following this diagram http://img638.imageshack.us/img638/430/lptjtagprog1.png ? I also found this http://s8.photobucket.com/user/XrachAelX7/media/spiffy_lpt.png.html .
Which one should/can I use? Thank you in advance! :)
 
R

reaper57

Junior Member
Dec 5, 2014
22
0
No, they haven't arrived yet. The rev C should be here soon, but the CR3 lite in the RRoD console might take a few weeks. Do the pics really matter? Are there different revisions of the CR3 lite? If yes can you just give me a diagram (or tell me which one to use from the ones I posted), and I'll post the pics of the CR3 lite when it gets here?
 
R

reaper57

Junior Member
Dec 5, 2014
22
0
As I said the CR3 lite is in a RRoD console so I'm assuming it was installed before it was discontinued. And the rev C well, I hope it's real the guy didn't say anything about it being fake, but it could be if it was discontinued a year ago.
 
R

reaper57

Junior Member
Dec 5, 2014
22
0
Can I get a simple yes or no answer? I just want to know whether the cable I have can be used to program a coolrunner and a CR3 Lite or not. I don't get all of these questions. Or maybe it's a secret that only a few people know, but are forbidden from talking about it? :D
 
R

reaper57

Junior Member
Dec 5, 2014
22
0
Thank you for the reply! So I can use the lpt cable from the first diagram and I don't need to make the one from the second right?
 
You must log in or register to reply here.