Coolrunner function with Demon

[janam4u]

just did my first dual nand for a friend
i little while ago (trinity)

and it appeared to me the coolrunner glitchs
on both nands--- is that correct??

If so am i correct in the assumption that
on M$ network its the modded dash
and not the Glitched booting of a Retail nand that it problematic

also how does the EN pad on the coolrunner function

 

[Utmad]

You havent flashed the demon xsvf file then to the cr

 

[professor_jonny]

The en pad on the demon /coolrunner plug is the control from the demon to switch on or off the coolrunner if you wish to boot retail with the coolrunner disabled.

you have to flash the coolrunner with the correct file as well as connecting up the en pad for it to do what you want.

 

[Martin C]

If you have a CR3 Lite and Demon enabled xsvf written to it (and the ribbon cable between the DemoN and CR3 Lite), you don't need to solder anything to the pad.

 

[janam4u]

ok i got all that

im wondering if when i only had the coolrunner installed(and glitching) and was booting the stock retail dash

WAS i Live safe

 

[Martin C]

It shouldn't be glitching. You've done something wrong.