Coolrunner help...

[DiamondKing1976]

Try moving your wires away from the coils on the board as far as possible. I had similar problem with my Falcon. I routed my wires pretty much right through the coils and my box would freeze. Sometimes it would glitch and the TX coolrunner would quit flashing green. I moved my wires away from the coil and bam, no more issues.

I also read somewhere that it is a major no no to update to a different dash and put an old original nand back on. You will need someone way more experienced to help you with that one though.

 

[fez lightning]

OK I will try that, forgot to mention when I restore nand back to original my xbox try's to boot then give 3 red lights. Is this related to me not reading my nand when I updated my dashboard to 13604. My original nand was dumped when I had 13599

could be part of the problem. find a donor nand somewhere that's 13604 and build a new "original nand" for that dash using nandpro.

 

[digiman]

Ok i will try the donor Nand part first, and my console is Zephyr. could the B wire be my problem i used alternate point FT2R2? i used that alternate point cause that other one is really small

 

[digiman]

I got it working just needed to change cfldv = to my total number of f's on Fuseset 7 and it worked

 

[digiman]

Only weird thing is I need usb stick with xenon.elf file to boot xbox 360 is this normal?

 

[digiman]

sorry for all the posts this is the last on cause i fixed it. Thanks guys for the help