coolrunner installed wrong HELP

[guestie]

Hi all hope someone can help here basically due to my stupidity and my annoying nagging wife I installed the coolrunner yellow wire in the wrong place and put at the other end of the row of solder line and now xbox switches on but just sits ther till it red rings can anyone shed some light on the problem.....oh and the error code is 0022
:facepalm:

 

[garageinc]

put it in the right place maybe?

 

[guestie]

tried that no joy now Im getting a flutuation in power when starting up

 

[keil423]

post pics of your install. what mobo are you running?

 

[ball00]

Try flashing the original nand. Disconnect the coolrunner and see if it boots. If it doesn't then you know you have a problem with the console and not the install.

Failing all else trade it in for a newer model (the wife that is not the xbox. LOL)

 

[guestie]

ya bloody would love too but anyway back to xbox lol did all that removed everything and reinstalled original nand but nothing just sits there< I have reinstalled the wiring correctly now but nothing still

 

[ball00]

HOws the pad looking next to the hanna chip? STBY_CLK

 

[joelj]

Hi all hope someone can help here basically due to my stupidity and my annoying nagging wife I installed the coolrunner yellow wire in the wrong place and put at the other end of the row of solder line and now xbox switches on but just sits ther till it red rings can anyone shed some light on the problem.....oh and the error code is 0022
:facepalm:

OK follow these steps and we can help u...

1. Post install pics, clear ones so we can see what has gone wrong....
2. IF and only IF your install is correct then lets try reflashing your console with original nand and put coolrunner to PRG.
3. IF that works try doing the RGH procedures again.

Cheers and yeah nagging is in the DNA of women :crazy: u got to live with it.... LOL

 

[guestie]

prob with posting pics is I have recorrected the the wrong solded wire and put in the right place now & for ball00 which pad near hanna chip do you mean the orange wire pad as that good

 

[garageinc]

there are still many things could be spotted from a photo. bridgeing, wrong points used to name a couple

 

[guestie]

ok well did what u said to do garageinc and now I get 3 red rings with error code 1022

---------- Post added at 11:40 ---------- Previous post was at 11:39 ----------

oh and how do i put photos on here

 

[garageinc]

use the add reply button and there will be manage attachments, it doesn't show when you quick comment.

what do you mean? putting it on the correct point gives you rrod?

---------- Post added at 18:42 ---------- Previous post was at 18:41 ----------

sounds like your orange wire is shorting the ana chip

 

[ball00]

Definitely get us some pics up. And let us know where you attached the yellow wire first time round.

 

[guestie]

right I installed the yellow wire on the other end of the row FT6u3 and installed the nand-x blue/green wires wrong way round will up pics tomorrow as they coming out crap as lighting sh*t in my house

 

[x360ccm]

the yellow line i put on this pic is were he solder the yellow wire.

the other 2 pics are how it did look.if that helps you guys out.

it's had orig nand put back on it.there no damage to the traces or no shorts.

i dont no if he has put the coolrunner back in it.

 

[guestie]

Hi dgenx thanks for help today and ya I put the coolrunner back in

 

[garageinc]

ok i'm lost now. i get that the first photo shows where the yellow wire was mistakenly placed but what are the other 2 because those are jtag wiring of some kind though its a bit of a state to be honest and doesn't look right either.
cant tell anything until there is clear photo's of the coolrunner installed

 

[x360ccm]

ok i'm lost now. i get that the first photo shows where the yellow wire was mistakenly placed but what are the other 2 because those are jtag wiring of some kind though its a bit of a state to be honest and doesn't look right either.
cant tell anything until there is clear photo's of the coolrunner installed

them other 2 pics are how it was when he brung it down to me,i cleaned it up so i no theres no shorts or breaks in the traces.

he had already took the coolrunner out before it got to me.

it has the retail nand on it aswell.

 

[bandit123]

them other 2 pics are how it was when he brung it down to me,i cleaned it up so i no theres no shorts or breaks in the traces.

he had already took the coolrunner out before it got to me.

it has the retail nand on it aswell.

yey 1 of my pics got used as a reference thanks

 

[x360ccm]

yey 1 of my pics got used as a reference thanks

yeah it did coz it was the only one i could find that i could pin point.were he put the yellow wire.:tongue: