RGH Coolrunner leds/programing

[ByteBit]

Hi guys
Right coolrunner installed in trinity, when powered the coolrunner only shows 1 red led, when switched to prog
all leds are out .
Multi meter gives 3.34v @ power pads on Cr, all wires look good(using orig install points (wires))
Can't prog with 360gc program or impact.

cheers 4 ur time guys
Byte :frown:

 

[Justice1231]

Not sure what your trying to ask here so the red led on the coolrunner will always be on providing you have your powersupply in. The green led should be on if you havent programmed the C/R, and once programmed it will go out. When you turn your xbox on, providing its soldered correclty the red led will be on, and the green led should come on for around 2 seconds, and the go out for around 6 seconds until the xbox glitches. hope this helps.

 

[ByteBit]

Thanks for the clarifiction about the leds, yeah i did have green led when i first installed i understad what you mean about flashing/glitching.
comes on like you said(2 secs, then as glitching)
can't get any leds lit when switched to prog mode(slim on other switch)
have flashed with Cr in norm mode (didn't think it would)
all now seems good, just glitched into xell and used raw flash to write glitch image, i'm now into dash

thanks guys llife savers

Byte

 

[Netkar]

please delete