can any one help please have installed a reset glitch but it does not bootup when the xbox boots seems to be wired correctly and when you flash the glitch the green light flickers to show its being programmed then when you switch it to normal and boot the xbox the red light does not show my board is a falcon opus has anyone else had this issue
JTAG coolrunner not booting
- Thread starter dobsy83
- Start date
Goldensavage
VIP Member
Post pics of wiring and explain your process clearly.
Generic questions like this one, get looked over, because there is not enough info
Generic questions like this one, get looked over, because there is not enough info
Step by step of what i did.
1) I installed the phat QSB
2) Then i dumped the nad with the nad x
3) Then i soldered all the wires for the cool running reset glitch.
4) Then i programmed the reset glitch with j tag tool and it blinked green when i was programming.
Thats as far as ive got as cant boot up to get cpu key, as reset glitch is not getting any power but if i plug in the nad x into the reset glitch it powers it up.
Thanks
1) I installed the phat QSB
2) Then i dumped the nad with the nad x
3) Then i soldered all the wires for the cool running reset glitch.
4) Then i programmed the reset glitch with j tag tool and it blinked green when i was programming.
Thats as far as ive got as cant boot up to get cpu key, as reset glitch is not getting any power but if i plug in the nad x into the reset glitch it powers it up.
Thanks
BL4K3Y
VIP Member
Can you also provide images of your underside wiring too please.
Also, is your CoolRunner programmed with the correct xsvf/jed timings for your motherboard type?
Also, is your CoolRunner programmed with the correct xsvf/jed timings for your motherboard type?
steveoo1
VIP Member
on the j tag tool i chose the falcon motherboard option and then i programmed the reset glitch.
Yes i have created and written ECC image
its just not booting up with the xbox it seems dead but if i plug the nandx its powers up fine
Yes i have created and written ECC image
its just not booting up with the xbox it seems dead but if i plug the nandx its powers up fine
Just use multibuilder to create the ecc and not the jtag tool frontend. I had the same problem j tools and the ecc.
where do i probe for the 3.3v is it of the red lead and the black lead which is earthed cos im getting 3.27v
Last edited:
i am only getting 3.27volts
---------- Post added at 09:53 ---------- Previous post was at 09:50 ----------
since i bought my glitch they have added a resistor to the kits what does this do and do i need one
---------- Post added at 09:55 ---------- Previous post was at 09:53 ----------
since i bought my reset glitch mod traders have added a resistor to the kit what does this do and do i need one?
---------- Post added at 09:53 ---------- Previous post was at 09:50 ----------
since i bought my glitch they have added a resistor to the kits what does this do and do i need one
---------- Post added at 09:55 ---------- Previous post was at 09:53 ----------
since i bought my reset glitch mod traders have added a resistor to the kit what does this do and do i need one?
Ubergeek
Xecuter Groupie
its not a resistor its a capacitor and what you need to do is read first, post questions later.
you'd save yourself a lot of time and effort.
Hi thank u all for ur help i have removed the qsb from the mother b and my metter reader is still giving 2.27 and still cant get the reset to come on wen i boot the xbox up but as i was saying only way i can get power is wen i plug the nandx to it i really dont no wot i can do to get power to the reset from the xbox 
---------- Post added at 12:30 ---------- Previous post was at 12:28 ----------
If any 1 has a link or somethink to sort this prob out plz let me no many thanks dave
---------- Post added at 12:30 ---------- Previous post was at 12:28 ----------
If any 1 has a link or somethink to sort this prob out plz let me no many thanks dave
Learn to spell. Trying to read your post is obnoxious.Hi thank u all for ur help i have removed the qsb from the mother b and my metter reader is still giving 2.27 and still cant get the reset to come on wen i boot the xbox up but as i was saying only way i can get power is wen i plug the nandx to it i really dont no wot i can do to get power to the reset from the xbox
---------- Post added at 12:30 ---------- Previous post was at 12:28 ----------
If any 1 has a link or somethink to sort this prob out plz let me no many thanks dave
Martin C
VIP Member
Does your console still boot ok?
If so, send it to someone to repair. It's plainly obvious that you're unable to complete this yourself.
If so, send it to someone to repair. It's plainly obvious that you're unable to complete this yourself.
Sorry everyone - I am getting 3.27 is this enough?
I have done what everyone has told me to do.
I have checked my solder points on the QSB to the mother board and on the reset glitch
I have removed the QSB from the mother board and checked what voltage I am getting and its still 3.27 volts.
I have done what everyone has told me to do.
I have checked my solder points on the QSB to the mother board and on the reset glitch
I have removed the QSB from the mother board and checked what voltage I am getting and its still 3.27 volts.
Ubergeek
Xecuter Groupie
Like Martin says - give it to someone who knows what they are doing before you break your console