Coolrunner programming?

[Domeybear]

Hello and thanks for all the help in advance. I ordered my nandx and coolrunner online and they finally came in. I bought this kit used for cheap. It has everything but the NAND x to coolrunner program cable. Anyways I ordered the cable and it's on the way. Here's my situation I need help with. The guy I bought the kit from used it on a slim. He installed NAND x and his own coolrunner but he never programmed the coolrunner....... He doesn't have the cable and nor did he use a lpt. His console works and boots fine and he has xell or whatever. How did this happen? Did he get the only coolrunner that comes programmed? Any help would be great.

 

[Domeybear]

Wow. Nobody can give me an answer???? I thought this was the team xecuter forums. Should I go somewhere else for this info? Thanks for nothin

 

[mozo88]

Each coolrunner has to have its own specific programming based on motherboard type. The coolrunner programming involves putting the correct timing files to start the RGH.

Each coolrunnner has the Xell/ECC Glitch image which differs per console.

You have to keep the coolrunner installed in the console to maintain the RGH. You cannot take it out once your done.

---------- Post added at 17:12 ---------- Previous post was at 17:10 ----------

or in other words the guy who you bought it from is full of crap if he says his console still boots fine w/o coolrunner.

---------- Post added at 17:19 ---------- Previous post was at 17:12 ----------

Wow. Nobody can give me an answer???? I thought this was the team xecuter forums. Should I go somewhere else for this info? Thanks for nothin

We don't get paid to answer questions. We aren't monitoring these forums 24/7. Our advice is free and we take time out of our day to give it to you. So please be patient and the least you can do is thank us.

 

[Domeybear]

He has his own coolrunner installed. I mentioned that. How is his coolrunner programmed if he didn't use the nandx cable or lpt? His boots with xell on slim.

 

[Ubergeek]

Wow. Nobody can give me an answer???? I thought this was the team xecuter forums. Should I go somewhere else for this info? Thanks for nothin

and a post like this instantly labels you are complete a**h**e :facepalm:

---------- Post added at 19:28 ---------- Previous post was at 19:27 ----------

He has his own coolrunner installed. I mentioned that. How is his coolrunner programmed if he didn't use the nandx cable or lpt? His boots with xell on slim.

because he is either full of sh*t or someone programmed it for him.

your friend is full of sh*t for sure.

 

[sick360mods]

Maybe he used a xilinx cable

Sent from my PC36100 using Tapatalk

 

[Domeybear]

please read carefully. He bought the NAND-x and 2 coolrunners. Installed on his Xbox and shipped me the NAND-x and other coolboarder.

 

[mozo88]

He has his own coolrunner installed. I mentioned that. How is his coolrunner programmed if he didn't use the nandx cable or lpt? His boots with xell on slim.

The guy I bought the kit from used it on a slim.

Sorry, I got confused after reading that line. You have to program the coolrunner someway there is no way around it. And since you said you already ordered the nandx to coolrunner cable why not just wait for it.

 

[Anobix]

your friend is full of sh*t and programmed it himself or he bought it pre-programmed from someone else or somehow miraculously got one that was tested and was pre-programmed.

You waited 40 minutes to bump your own thread bitching about not having a response. Even though you are waiting for the cable to come in, so it is hardly an urgent issue.

 

[Domeybear]

He says all he did was wired the coolboarder to mb. Then installed nandx and ran coolshrimp. It sounds odd to me also.

---------- Post added at 18:39 ---------- Previous post was at 18:33 ----------

your friend is full of sh*t and programmed it himself or he bought it pre-programmed from someone else or somehow miraculously got one that was tested and was pre-programmed.

You waited 40 minutes to bump your own thread bitching about not having a response. Even though you are waiting for the cable to come in, so it is hardly an urgent issue.

And that's why it says "thanks in post" and your name has a 0 next to it. I'm just wondering how this happened. Not lookin to bitch about an install or part.

 

[Ubergeek]

Your attitude stinks.

 

[mozo88]

Your coming off as really rude, but I will answer your question again.

I'm just wondering how this happened. Not lookin to bitch about an install or part.

The answer is, it did NOT happen the guy is lying to you. It is impossible to just install a coolrunner to a mobo and for it to magically work. It needs to be programmed!

 

[bigO73]

Better hope the stuff you bought from this guy works. Sounds like he's FOS!

 

[synxx]

Your attitude stinks.

especially for a new member. good luck getting help round here if you dont change your attitude towards other members.

 

[TilVl]

Ban this a**h**e. We have an amazing community. No need for this type of attitude around here.

Sent from my SGH-T839 using Tapatalk

 

[splatem]

Each coolrunner has to have its own specific programming based on motherboard type. The coolrunner programming involves putting the correct timing files to start the RGH.

Each coolrunnner has the Xell/ECC Glitch image which differs per console.

You have to keep the coolrunner installed in the console to maintain the RGH. You cannot take it out once your done.

Pretty funny thread. The comment above in purple isn't entirely accurate. A coolrunner programmed to work on a trinity motherboard will work on any trinity, not just one unique console. The xell image isn't actually loaded to the cr.

 

[rdubbs007]

Pretty funny thread. The comment above in purple isn't entirely accurate. A coolrunner programmed to work on a trinity motherboard will work on any trinity, not just one unique console. The xell image isn't actually loaded to the cr.

Come on man you know he was talking about the xsvf that is loaded, and it is a different one for each mobo type.