Coolrunner Rev C and Jasper

mazenic01

Noob Account
Jul 28, 2014
4
0
hello


I installed a coolrunner rev. c on a Jasper 16Mb
The Bitstream used come from the group glitchteam
because I used the glitchspi 3.0 to program the coolrunner.
I wanted to know if you think they are reliable because I've tried
all the timings but I can't glitch this console.
The Red light is on and the Green led switch on and switch off.
The switches used to configure the coolrunner are:
JP = Open
CAP = Closed
Switch = 1-2
Switch = Phat

Thx for help
 

Utmad

VIP Member
Aug 15, 2010
3,304
118
Southampton, UK
hello


I installed a coolrunner rev. c on a Jasper 16Mb
The Bitstream used come from the group glitchteam
because I used the glitchspi 3.0 to program the coolrunner.
I wanted to know if you think they are reliable because I've tried
all the timings but I can't glitch this console.
The Red light is on and the Green led switch on and switch off.
The switches used to configure the coolrunner are:
JP = Open
CAP = Closed
Switch = 1-2
Switch = Phat

Thx for help
Complete the RGH template in my sig with photographs to get any support
 

mazenic01

Noob Account
Jul 28, 2014
4
0
Product Used : Glitchspi 3.0, coolrunner Rev. C
Console Type: Jasper
NAND size: 16
Dashboard version: 2.0.16747
CB version: 6754
Screenshot of NAND details from J-Runner: N/A Because i've extract the nand with glitchshark

J-Runner log: N/A
Log Autogg :
CERCO LA NAND: "nand\nanddump.bin"




-------------------------------------------------------------------------------------------------------------
NandPro v3.0a by Tiros


Using Virtual Nand Device File: nand\nanddump.bin
Flash Config: 0x00023010
Block Size: 16KB Block Limits: 0x000000..0x000000
File: common\temp\flash.bin
Reading
0000
0000






-------------------------------------------------------------------------------------------------------------
Small Block trovato
Flashconfig:0023010 Size=16
Caricamento Nand ...OK
Controllando i Bad Blocks ...
Nessun Bad Block trovato


Checking ECC-CheckSum... Wait


-------------------------------------------------------------------------------------------------------------
Ecc Check: OK


-------------------------------------------------------------------------------------------------------------
Done
VERIFICA SMC_CONFIG
Smc Config trovato: 0x00FEB800
Lettura temperature...:
Reset Parental Code: LAXU
VERIFICA NAND DATA


ID: 6be95e4
ECC - unECC
Trovato SMC (version 2.3) : 00001000 - 00004000


Nand RETAIL (Original)
Trovato Keyvault : 00004000 - 00008000
Looking for Cpukey in Local Database. Not Found
Alla ricerca della Cpukey in cpukey.txt. Not Found
Looking for Cpukey on Nand.Not Found
Trovato CB_A (build 6754) : 00008000 - 0000a000
Trovato CB_B (build 6754) : 0000a000 - 000136c0
Trovato CD (build 6754) : 000136c0 - 00018740
Trovato CE (build 1888) : 00018740 - 0006e7b0
Trovato CF (build 15574) : 00070000- 00074560
Trovato CF1 (build 16547) : 00080000- 00084560
Trovato CG (build 15574) : 00074560- 000e6c00
Trovato CG1 build 16547) : 00084560- 000fa00c
Nand valida
VERIFICA MODELLO CONSOLE
SMC 2.3 - .Verifica versione
Verificando se è modificabile...
Modello : Jasper CB_A_6754 GLITCHEABLE
CD_6754 Non JtaggABILE


Size: 16


Reloaded_Glitch.bin


-------------------------------------------------------------------------------------------------------------
1 file copiati.


-------------------------------------------------------------------------------------------------------------


FileSystems:
FileSystem Active:124 offset:0x95CC00
FileSystem Last:103 offset:0xCECE40


Block Size File
0x00001000 0x00003000 SMC_2.3.bin
0x00004000 0x00004000 Keyvault.bin
0x00008000 0x00002000 CB_A_6754.bin
0x0000A000 0x000096C0 CB_B_6754.bin
0x000136C0 0x00005080 CD_6754.bin
0x00018740 0x00056070 CE_1888.bin
0x00070000 0x00004560 CF_15574.bin
0x00080000 0x00004560 CF1_16547.bin
0x00074560 0x000726A0 CG_15574.bin
0x00084560 0x00075AAC CG1_16547.bin
0x00D30000 0x00014000 aac.xexp2
0x00D44000 0x00061000 bootanim.xex
0x00DAC000 0x0001D000 hud.xex
0x00DCC000 0x00014000 huduiskin.xex
0x00DE0000 0x00008000 mfgbootlauncher.xex
0x00DE8000 0x0000C800 nomni.xexp2
0x00DF8000 0x00005000 nomnifwm.xexp2
0x00E00000 0x00002000 nomnifwk.xexp2
0x00E04000 0x00253000 xam.xex
0x00188000 0x00017000 ximecore.xex
0x001A0000 0x00002800 ximedic.xexp2
0x0057C000 0x0006A010 sysupdate.xexp2
0x001F0000 0x00018000 xenonclatin.xttp2
0x00208000 0x00007000 xenonjklatin.xttp2
0x00218000 0x0000C000 createprofile.xex
0x00224000 0x00598000 dash.xex
0x00830000 0x0000A000 deviceselector.xex
0x0089C000 0x0000DE60 dae.bin
0x0083C000 0x0001B000 gamerprofile.xex
0x00858000 0x0000C000 minimediaplayer.xex
0x00864000 0x00019000 signin.xex
0x00880000 0x00007000 updater.xex
0x00888000 0x0000B000 vk.xex
0x009A4000 0x0011B000 xenonclatin.xtt
0x00AD8000 0x001A8000 xenonjklatin.xtt
0x00C98000 0x00090000 ximedic.xex
0x00C8C000 0x00000A00 crl.bin
0x00910000 0x00000400 secdata.bin
0x00908000 0x00004000 extended.bin


-------------------------------------------------------------------------------------------------------------
* CpuKey sconosciuta. Se la sai inseriscila nel campo "Cpukey" o usa altri
metodi per recuperarla.

* Qualora non l'abbiate ottenuta scegliere ancora XeLL>Tipo e premere NandXell>Crea



Photo attached with the previous reply

Description of problem:

I cant' glitch this console

Was the console working before you started: Y
 
Last edited:

mazenic01

Noob Account
Jul 28, 2014
4
0
Is it correct the template?

Another question I've unsoldered the glitchspi after read the nand is it correct?
 
Last edited: