ANSWERED Coolrunner stopped working after 6 days

S

sonix77

Junior Member
Nov 30, 2011
11
0
Hi, I have a trinity slim with coolrunner. Everything was working fine for 6 days with the rgh; with a typical boot between 20 - 50 secs and occassions of 2 minutes.
However after leaving on for a couple of hours (longer than the other times I had used it before) and then switching off; upon powering on I now just get a black screen. I have tried flashing the nand again to see if it was corrupt but that didnt fix the issue. Is it likely a solder issue or is it worth reflashing the coolrunner?

Cheers!!
 
S

sonix77

Junior Member
Nov 30, 2011
11
0
No Green light. Just flickering Red.
I guess I'll have to take it apart again to get some photos. I took it apart to look at the front and it seamed OK but I didnt look at the back and I didnt test with a meter. The only picture I have of the front isnt great but here it is
 
N

N.E.Modz

VIP Member
Sep 27, 2009
2,285
68
A.K.A daleh43
sonix77 said:
No Green light. Just flickering Red.
I guess I'll have to take it apart again to get some photos. I took it apart to look at the front and it seamed OK but I didnt look at the back and I didnt test with a meter. The only picture I have of the front isnt great but here it is Link To Image
Click to expand...

flickering red light tells me that your red &/or you black wire isnt soldered correctly. Or you have a short somewhere.

dale;)
 
S

sonix77

Junior Member
Nov 30, 2011
11
0
I would say it is dim for about 4/5 seconds then two quick brighter flashes and then dim again, repeating. Would you say this is either a short or red &/or black wire?

Thanks
 
S

sonix77

Junior Member
Nov 30, 2011
11
0
Ive updated the photo in the first post showing the coolrunner wiring

---------- Post added at 18:33 ---------- Previous post was at 18:29 ----------

Found it, the black wire has come loose from the ground connection!

Thanks guys!!!!
 
You must log in or register to reply here.